S&B PM II help

[gpo1956]

The elevation turret popped off my 3-20 and I need some help. I got it back on, but now I've only got 12.5 mils of travel. I had this happen before on another one, but for the life of me I can't remember how to get it back. Seems like there was a thread somewhere with pictures of how to set it up. Any ideas?

 

[Kimber7man]

@lancetkenyon

 

[MallardAddict]

Reset the elevation turret to factory.

Back out both zeroing setscrews on the elevation turret (backed out at least 1 full turn), ensuring that the elevation turret is silent when you rotate it? It should be silent with the 2x set screws backed off, if not loosen a bit further and try again.

Once it's silent, with the 2x set screws loose rotate the elevation knob all the way up to the second revolution (yellow in the windows), stop at around 26 mils. Ensure that you keep light downward pressure on the knob while you do this. Once you get to around 26 Mils total gently snug the set screws back down

You should now have full travel back in your elevation turret allowing you to rezero and set your zero stop.

 

[gpo1956]

Thanks for all the replies and pms. I actually solved the problem. The zero stop was not seating all the way to the bottom. I cleaned it and relubed it got it full seated and everything is good to go now.