• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

RL-16 recipes

I use lapua brass and fed match primer and h4350 and 147eldm. Shot under 4 inches 10 shot group at 1000 yards. It was the 3rd smallest group shot at Williamsport last yr. I wanted rl16 to shoot but couldn't get the consistency of h4350. Rl26 gave 100 fps more speed but was finicky. Rl23 shot real good. I run the 147s at 2850 with no pressure at all. That were my accuracy is the best. For hunting I would have no problem using rl26 and a 143eldx at 3000 fps. Rl26 really wakes up a lot of rounds. Shep
 
Update: rifle seems to like 41.7gr of RL-16 pretty good! Didn't get to max charge yet but think I will shoot this combo for at least this season.
CCI-200 primer
Hornady brass (weight sorted)
135gr Berger Classic Hunter
.020" off the Lands
 

Attachments

  • DD6A3FD9-E1B0-4D6D-85E9-AAD57514E70F.png
    DD6A3FD9-E1B0-4D6D-85E9-AAD57514E70F.png
    253.8 KB · Views: 169
Looking for some RL16 recipes for 300WSM 175-200gr bullets if any has some to share? Thanks
 
Love me some Reloder 16! All loads below are sub-half MOA out to 500 yards (furthest tested on most of these) and max loads before accuracy falls off in my particular rifles. All are Fed 210M primers but for the Win Mag and 175 VLD load that use Winchester Magnum primers. Most brass is Peterson or Norma.

6.5 Creed w/120 Etip - 43.2 grains RL16

6.5 Creed w/129 Interlock and 140 SST - 43 grains RL16

6.5 Creed w/143 ELDX, 142 ABLR, and 140 AB - 42.8 grains RL16

6.5 Creed w/140 Hot Cor - 42.4 grains RL16

30-06 w/150 SST - 59.5 grains RL16

30-06 w/175 VLD - 54.7 grains RL16

30-06 w/180 AB and 180 TBT - 54.5 grains RL16

338 Win Mag w/250 AB - 65.4 grains RL16

338 Win w/225 TTSX and 230 ELDX - 70.8 grains RL16

Still to test: 7mm-08 with something in the 140 bullet range (have had great success w/RL15) and 7mm WSM in 160-168 range
 
Love RL-16...hate the carbon buildup with it but dang it shoots so fine. Expect low SE and SD with it. Here is Alliant load data that I used with 165 Sierra GC, Nosler 168 LRAB, Nosler 180 AB and all shot very well with it.
 

Attachments

  • Alliant Powder.300WSM.png
    Alliant Powder.300WSM.png
    18.9 KB · Views: 187
Initial RL16 load data published by Alliant a few years ago.
 

Attachments

  • RL16_Initial_Loads.pdf
    264.5 KB · Views: 295
Settled on 42.2gr... lil gun shoots better than I can after two cups of coffee and sinus meds this morning!
 

Attachments

  • 91906027-37A2-4946-AE74-022B4E1911D0.jpeg
    91906027-37A2-4946-AE74-022B4E1911D0.jpeg
    965.2 KB · Views: 118
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top