BrentM
Well-Known Member
I use boretech and haven't bothered to look at anything since switching. Absolutely love this product and 2 of my gunsmith buddies use it exclusively too.
Rifle Cleaning Procedure & Products?
- Thread starter Brydawg512
- Start date
Help Support Long Range Hunting Forum
Go to a browser and simply type in, "How to clean a rifle," into it and you will get any number of different methods and products to use. They all pretty much all work as advertised.
Bang4theBuck
Well-Known Member
I once read that 90% of the problems that gunsmiths saw on firearms was caused by cleaning. Obviously, that infers 'improper cleaning'. I know how to do it right, I just opt to not do it, and certainly not after a range trip. I shoot every week, and multiple rifles on each trip....this just extends the amount of time needed to enjoy my hobby. Not for me unless/until absolutely necessary. Just sayin
waveslayer
Well-Known Member
If the groups start to open up or it's been wet from hunting, no reason to clean! Don't touch it. The gun will tell you when it's dirty and needs love. Too many over clean, this isn't F class benchrest barrels!
Skip the cleaning. I haven't pushed a patch threw a gun in ages. Only one rifle showed larger groups then it's normal, cleaned it and that was after 3000 rounds plus
Skip the cleaning. I haven't pushed a patch threw a gun in ages. Only one rifle showed larger groups then it's normal, cleaned it and that was after 3000 rounds plus
MagnumManiac
Well-Known Member
Watch Eric Cortina's videos on cleaning, this is how I have cleaned my comp barrels forever, they are a consumable.I clean after a full weekend match, not after each round/match, there's really no time to do so.
I use a lot of JB Bore Paste, it's great stuff and mild on Stainless barrels, I do not use the red polishing paste, it is far coarser.
Cheers.
I use a lot of JB Bore Paste, it's great stuff and mild on Stainless barrels, I do not use the red polishing paste, it is far coarser.
Cheers.
I would recommend at a minimum a bore guide. A bore scope is a nice to have and really can show you what needs cleaned, what's still there and what is or isn't working. I thought I got my barrels clean until I got a bore scope, then I spend a couple weeks cleaning all of my rifles. An alcohol flush at the end has made me certain that my bore isn't going to rust. I agree with checking into Erik Cortina'a videos. Also check out some of the Primal Rights stuff. Be careful if using an abrasive and know what you're doing before you do.
Please remember to foul your bore before hunting again as DTF370 advised. I use five rounds before any serious shooting after cleaning. Also, the advise the watch Eric Cortina's cleaning video is great advise.
Good luck and be well!
Good luck and be well!
I think that's where you are supposed to push some kinda stick or coat hanger with a rag thru the barrel ! Might be mistaken here though!
Which Eric video....the one where he says " USE CLR" or the one he released a short time later saying " NEVER USE CLR ON ANY BARREL"
Brydawg512
Well-Known Member
Yes, it's just an "end of season" clean if you will. It did get mildly wet from some snow/rain mix but not drenched.
Do you personally wait until accuracy starts to degrade before cleaning your barrel? Also what do you use for grease for bolt lugs?
Well, to each their own. Personally I clean, at least the bore after doing any shooting with the exception of just prior to hunting. Then I verify the sighting and grouping with the ammo I am going to be using then don't clean until after season is over and I'm going to put the rifle away for awhile. Another thing that I still do that will make some of you younger folk apoplectic is that I coat the interior of the rifle bore with oil when storing the rifle. Easy enough to send a patch or two to dry out the bore before sending a fouling shot downrange. By the way, two of my rifles are occasionally used in "F CLASS," but all are treated like F Class barrels. Barrels are not cheap, oil is.
