True enough.
I did however note that Remington's website boasts "hammer forged" barrels on all their 5R's while Schneider barrels are button pulled. Not a knock on hammer forged as when done right, they're great.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Remington 5R
- Thread starter Overkill338
- Start date
Help Support Long Range Hunting Forum
True enough.
I did however note that Remington's website boasts "hammer forged" barrels on all their 5R's while Schneider barrels are button pulled. Not a knock on hammer forged as when done right, they're great.
Montana'eer
Well-Known Member
I've been a lurker on this forum for years, read a lot of posts, found this one and felt I had some valuable feedback esp regarding the reputed accuracy of the 5R Rems.
First off this is my first 2 Remington rifles I've owned. My current go to rig is a Browning x-bolt Hells Canyon in 7mm-mag. Love it. My load is 160 Nosler partitions just shy of 3,100 fps and it's a mule deer smashing machine.
However this past December a buddy of mine who has a small shop called and said his supplier had a heck of a deal on a year end inventory deal IF he bought 5 certain Remington models. He said if I bought two I'd get them at his cost. On top of that there was a $75 rebate on each- so I jumped. I won't publish the price but I could sell one and basically have a free rifle.
I bought a 6.5 creedmoor and a 20" .308. I really like the handy size of the 20" barrel and it may complement my main rig which has a 26" tube.
I grabbed a box of Federal GMM, 168 gr variety and started break in and sight in. I had a vx3 4.5-14x40 lying around so I mounted it up. Used factory ammo to sight in, then started load testing using 5 shots first of Federal as a general benchmark, the starting my loads at 43gr IMR 4064, working up .3gr increments, .030 off the lands measuring velocity and groups.
Shooting top left working right. I got as far as 43.6 gr and pressure signs began and accuracy fell apart. I have less than 30 rounds down this tube! I've got a group less than .2" at 110yards.
That is the fastest I've ever worked a load.
The rifle is bone stock out of the box.
Pretty amazing in my book..
First off this is my first 2 Remington rifles I've owned. My current go to rig is a Browning x-bolt Hells Canyon in 7mm-mag. Love it. My load is 160 Nosler partitions just shy of 3,100 fps and it's a mule deer smashing machine.
However this past December a buddy of mine who has a small shop called and said his supplier had a heck of a deal on a year end inventory deal IF he bought 5 certain Remington models. He said if I bought two I'd get them at his cost. On top of that there was a $75 rebate on each- so I jumped. I won't publish the price but I could sell one and basically have a free rifle.
I bought a 6.5 creedmoor and a 20" .308. I really like the handy size of the 20" barrel and it may complement my main rig which has a 26" tube.
I grabbed a box of Federal GMM, 168 gr variety and started break in and sight in. I had a vx3 4.5-14x40 lying around so I mounted it up. Used factory ammo to sight in, then started load testing using 5 shots first of Federal as a general benchmark, the starting my loads at 43gr IMR 4064, working up .3gr increments, .030 off the lands measuring velocity and groups.
Shooting top left working right. I got as far as 43.6 gr and pressure signs began and accuracy fell apart. I have less than 30 rounds down this tube! I've got a group less than .2" at 110yards.
That is the fastest I've ever worked a load.
The rifle is bone stock out of the box.
Pretty amazing in my book..
Attachments
Last edited:
James L Holzhauer
Well-Known Member
Its been a while but my Remington 700 in .308 shot nickel size groups straight out of the box.
