Powder recommendations for 6mm AI and 108 ELD-M

Just a hunter

Well-Known Member
Joined
Dec 4, 2019
Messages
273
Location
NC
I don't have QL or anything like that so I am looking for help. What is you guy's recommendation for powder with the above combination?
 
I happen to have some of that too. Do you have a good starting point? If not, I'll start low and work up. Thank you.
 
Probably RL 26 - difficult to buy, double base, slow, probably fill case close to 100% with 108's, usually highest velocities with suitable cartridges & optimum weight bullets.

Powder Valley has Accurate 4350 & MagPro - should be just OK but not ideal.

I shoot 95 VLD's in my 6mm AI with AA4350.

My starting loads with 105's & RL23 were 46.5 gr.

Best results with 105's - 50.0 gr, H1000.

87 Vmax loads with 50.0 VN165 or 46.5 RL16
 
Probably RL 26 - difficult to buy, double base, slow, probably fill case close to 100% with 108's, usually highest velocities with suitable cartridges & optimum weight bullets.

Powder Valley has Accurate 4350 & MagPro - should be just OK but not ideal.

I shoot 95 VLD's in my 6mm AI with AA4350.

My starting loads with 105's & RL23 were 46.5 gr.

Best results with 105's - 50.0 gr, H1000.

87 Vmax loads with 50.0 VN165 or 46.5 RL16
Thank you for that. Lots of good information there and as always I will start lower than your loads and work up from there.
 
Top