Help Support Long Range Hunting Forum
That would be a much better design if they made it ambidextrous. These tables are lighter, have a lot more room on them, ambi, can actually swivel point of aim through a 90 degree arc quite easily, and very cheap at about 45 bucks on sale at Lowes or Home Depot for the 4 or 5 footer. We drilled a hole in the corner of one for an umbrella.Legacy Shooting Products
Legacy portable shooting benches are the most stable, portable shooting bench available. Patent pending design offers many unique features in a compact design.legacyshootingproducts.com
This is what we use. Very solid and adjustable for uneven terrain. Used with a 3 leg drummer stool works very well.
Cool. Those look a bunch easier for those of us in our right minds to use.We have lefties shoot off our right hand bench often. Works fine. They do make ambi benches.
Legacy Ambidextrous Bench
We will have benches ready to ship around 09/15. We have encountered delays due to some equipment failure and anticipate being back in full swing about then. Benches will be packed and shipped in the same order received. We always email tracking information to you when the order is packed and...legacyshootingproducts.comU-Shape Ambidextrous
We will have benches ready to ship around 09/15. We have encountered delays due to some equipment failure and anticipate being back in full swing about then. Benches will be packed and shipped in the same order received. We always email tracking information to you when the order is packed and...legacyshootingproducts.com
They even make one that is dedicated to the backwards shooters.
Legacy Left-Hand Bench
Last one ever. We will discontinue theLH benches after this last one is sold, so if you want a dedicated LH bench, you should order this one now. All aspects exactly the same as our RH bench. Discounted shipping. View shipping cost when you check out.legacyshootingproducts.com
Was good! Made me laugh!
RB II, Hunting PD's is something I really enjoy doing. I go on 2-3 hunts every year. There are a number of different ways to hunt prairie dogs. I started out shooting of a fixed table, but I later started using a rotating table. Now I have my original rotating table mounted in the back of my pick up truck and a second rotating table (Caldwell Stable Table) mounted on a 6'X10' trailer. This system works good for me and my friends. My original rotating table is about 25 years old and is no longer in production. A few years ago I researched the internet for the maker of the table (Bob Jourdan) and found a reference to him as follows: "His metal shop guy, Rob Byfield, 918-333-8100 has the design and can build you the base, and then you can make/install the top to save on the shipping cost..." I don't know if this is true, but it might be something to check out. The Stable Table is not a bad rotating table, especially for the price, but it has a weakness in the design that puts it in a slight bind when rotating. My brother in law modified it (he put a cylinder on which it rotates on the base instead of on the bottom of the table) and it rotates really smoothly now. The original rotating table has been modified to sit on a pedestal that's bolted to a 4'x4' metal base in the truck's cargo box. The RASS looks like a good system, but I like having a table top to have my equipment on.
That looks very solid and I can see that the swivel would be very useful in picking up more targets with little "setup". Looks like a serious shooter owns that!!!!!!
I am considering building a three legged table. I have an abundance of 1" sch 80 pipe and sch 80 sleeve material that fits tight over the top of that, 1 1/4" IIRC. Likely would use a short section of the sleeve mounted to the top and insert the 1" legs into that. Fairly portable, collapsible and sturdy enough for most shooting. Considering this as I have these materials at hand and can cut/fit/weld up a bunch of leg/sleeve pieces in short order.
Make your own. Aluminum Unistrut for the legs and seat arm. 2 inch Aluminum conduit. Aluminum bar stock 3 in. For seat post and center post. quarter inch plate leg bracket and DEL Ron Plastic to line for center post. OH and plywood and a seat. You need to box in your seat arm. I had the alum I had bought for scrap price and still had about $250. In it. A guy in Montana made some similar to mine we're just over $800 10 years ago. I think he sold his patent to Codwell. Not for sure. I have made 3 of them.
That looks very sturdy. I can weld mild steel but no rig to weld aluminum, so SOL on building one of those. I do have a very large sheet of 1/4 aluminum plate. Would make a nice top for a base like that.
