Over sized ID recoil lug... good idea or bad?

I am trying to drill a hole in the receiver for the pin.
What is the distance from the center of the barrel hole to the center of
the pin hole?
I am having a hard time measuring it, but it is somewhere around .605"
to .608".
I have your standard lug.
TIA
Clark


to c.magnuson
Clark, the dimension is .605... Good measuring...
Go forth and do GREAT things, check out our stocks muzzle brakes etc.
Thanks
Hollands
 

Attachments

  • Rem 700 Holland recoil lug pin, drill until the pin goes all the way in to clear the barrel shou.jpg
    Rem 700 Holland recoil lug pin, drill until the pin goes all the way in to clear the barrel shou.jpg
    81.1 KB · Views: 100
  • Buck 2013 436 meters 7mm RemMag.jpg
    Buck 2013 436 meters 7mm RemMag.jpg
    180.1 KB · Views: 96
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Similar threads

J
recoil lug sizes
Replies
4
Views
2K
jmason
J
morgaj1
Recoil Lug
Replies
6
Views
1K
morgaj1
morgaj1
K
? Recoil lug
Replies
4
Views
2K
NesikaChad
N
G
recoil lug
Replies
5
Views
11K
EddieHarren
E
W
Savage 110, is it a good idea to square the receiver face when replacing barrel and recoil lug? Anything else needed?
Replies
4
Views
894
jrock
jrock

Recent Posts

Top