One “Do it All Cartridge” - All of NA

memtb

Well-Known Member
Joined
Dec 30, 2013
Messages
6,625
Location
Winchester, Wy.
A subject that has been "beaten to death..... with many side-stepping the thread intent. Some choosing custom or full "wildcat" chamberings, some picking rifle/cartridge combo's with impractical weight for everyday, various terrain use by "normal" humans, factory ammunition must be available, potentially needed as a stopping cartridge. So, here's the criteria for the challenge.

Rifle/Cartridge must meet this criteria: only one rifle allowed
#1 - used for all North American Big Game (including dangerous game - assuming no back-up)
#2 - rifle weight - under 11.0 pounds (scoped, fully loaded, slung)
#3 - If a bipod is used - total rifle weight cannot exceed 11.0 pounds (scoped, fully loaded, slung, and bipod)
🌟 additional 👍 points for combo's coming in at less than 9.0 pounds
#4 - factory cartridge - (improved chambering allowed) must be able to fire a factory cartridge
#5 - various terrain - thick timber/brush to hunting elk, sheep or goats in the mountains, to wide open western plains
#6 - cartridge....bullet weight, bullet (cup-core, partition, mono) design (based upon a potential mixed bag hunt in "big" bear country - no back-up) and brief explanation for your choice

I hope I haven't missed anything!
This should give you something to think about while sequestered at home! So.....what's your "poison"? memtb
 
Last edited:
With those criteria Defiance CRF action or completely reworked and tuned Model 70, 24 inch #5 RockCreek, Nightforce 2.5-10x42 NXS in tip of scope base of my design, all in a McMillian Rem hunter stock, chambered in 338 Win shooting 250 Bergers for most shooting and 255 Shock Hammers for when needed. Deliberately would make it 10.5 lbs though I could make it under 8 lbs without issue.
It would be built specifically to not need a brake and to be extremely handy with excellent recoil recovery.
 
Last edited:
Thanks guys! I appreciate your responses, and do see a bit of a trend developing. I have my own perceptions, and have acted accordingly, just wanted to see how others felt! Keep 'em coming! memtb
340 wearherby on a blue printed Remington ti action 24 inch benchmark 1 in 10 twist #4barrel McMillan edge stock tally rings leupold vx5 hd 2-10x42 shooting a 260gr hammer bullet
 
This screams reliability to me. So all margin types are out. I agree with moosekiller's cartridge choice. I'd put it in a Macmillan stock and roll Nosler E-tips or Partitions in it. Big bear...pffft. lol.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top