Omega 300

[A-Tip]

Hi all, I own a SlincerCo Omega 300 suppressor and after having it for a couple of years now, i am liking it less and less. The QD setup is getting stuck on the brake frequently, is anyone else having this problem? I just got it back from getting unstuck and having the threads cleaned. I took it out and put a couple rounds down it, and it was stuck hard but not to the point where i couldnt get it off. Im going to try and put some high temp anti-seize on the threads to help remedy my problem, but im still not sure its going to work. Im thinking about putting the threaded cap on but worried that will also get stuck on one rifle. What would you guys recommend i do? I have a few brakes on a couple of different rifles and would like to keep this can versatile.

I have another can coming, hopefully soon, for 6mm and smaller. Planning on using that one for the smaller cal's and using this one for a backup and on my 300 PRC.

 

[A-Tip]

@338 dude yeah idk man, this can is really making me reconsider it.

 

[338 dude]

Hi all, I own a SlincerCo Omega 300 suppressor and after having it for a couple of years now, i am liking it less and less. The QD setup is getting stuck on the brake frequently, is anyone else having this problem? I just got it back from getting unstuck and having the threads cleaned. I took it out and put a couple rounds down it, and it was stuck hard but not to the point where i couldnt get it off. Im going to try and put some high temp anti-seize on the threads to help remedy my problem, but im still not sure its going to work. Im thinking about putting the threaded cap on but worried that will also get stuck on one rifle. What would you guys recommend i do? I have a few brakes on a couple of different rifles and would like to keep this can versatile.

I have another can coming, hopefully soon, for 6mm and smaller. Planning on using that one for the smaller cal's and using this one for a backup and on my 300 PRC.

I always use anti- seize on the threads and I've never had a problem.

 

[338 dude]

@338 dude yeah idk man, this can is really making me reconsider it.

It's a great can with all the specs and full auto rated, etc.. You must be doing something wrong. Start with the anti seize and maybe not shoot as many rounds before it is removed and re-attached.

 

[A-Tip]

Im thinking of using it but i dont want to have to carry around a bottle of anti-seize to swap from gun to gun all the time

 

[A-Tip]

It's a great can with all the specs and full auto rated, etc.. You must be doing something wrong. Start with the anti seize and maybe not shoot as many rounds before it is removed and re-attached.

see i only shot three rounds and then she was stuck on there pretty good

 

[338 dude]

Im thinking of using it but i dont want to have to carry around a bottle of anti-seize to swap from gun to gun all the time

It doesn't take much I just leave the residue on the threads when I swap from rifle to rifle a thread protector covers it when it's in the safe so I do not track it around

 

[338 dude]

see i only shot three rounds and then she was stuck on there pretty good

Try the anti-seize . I'm going in the other room right now and just pop mine loose with my bare hands. It's on a 300 blackout at the moment and I've probably shot 50 rounds down it lately
Yep, just like always popped it right loose with my bare hands no problem at all give the anti seize a try and I like the copper anti seize over the aluminum

 

[338 dude]

Try the anti-seas. I'm going in the other room right now and just pop my loose with my bare hands. It's on a 300 The moment and I'll probably shot 50 rounds down it lately
Yep, just like always popped it right loose with my bare hands no problem at all give the ant a try and I like the copper ant sees over the aluminumView attachment 590062

 

[A-Tip]

It doesn't take much I just leave the residue on the threads when I swap from rifle to rifle a thread protector covers it when it's in the safe so I do not track it around

i dont use a safe so i should be good for not tracking it everywhere

 

[A-Tip]

okay i'll try the copper antiseize, i have some of the aluminum stuff now but havent applied yet

 

[338 dude]

Once you've used it and it's coated I rarely have to add anymore or reapply unless I actually clean it off and remove it. I've had people complain about it saying the can comes loose, but it actually gets a little thicker with use and I've never had it come loose ever.

 

[A-Tip]

okay, yeah i'll try the copper stuff first before i do aluminum. thanks for all the help, i appreciate it. also do you know when i'll be able to post stuff in the classifieds, i think i meet all the requirements but i still cant post. i got some cool stuff to post on there

 

[338 dude]

okay, yeah i'll try the copper stuff first before i do aluminum. thanks for all the help, i appreciate it. also do you know when i'll be able to post stuff in the classifieds, i think i meet all the requirements but i still cant post. i got some cool stuff to post on there

Search the rules to be sure ,you used to have to be here one week and have 10 posts so you're doing good so far chatt it up, but there may be several days before your eligible.