Off the shelf help

[overinfinite]

Savage Precision or Ruger Precision for factory chassis rifles
Springfield waypoint, Bergara HMR, Browning X Bolt or Xbolt2 for factory stocks the brownings have flimsyness though. Also, the standard 307's seem like they have quite a bit of flex in the stock, fine for a bipod though.
I started this journey with a Ruger predator in 6.5CM over a decade ago and have built it in 5 different configurations since owning and have lent that thing out to so many people with different stocks/ chassis'. Shoots in the .7-.9 consistently with any berger or nosler bullet.

 

[JAYgs8163]

Go for the Weatherby and you should be good with factory ammo offerings on the 7PRC. I'd consider the 65 PRC as well for lighter recoiling if he's a novice but you could run the 7PRC with lighter projectiles if available to keep recoil down. Both have good support of factory ammo. 500 is pretty easy to attain with a good amount of practice by the shooter and the understanding of using it in the field wisely. There are so many well made factory rifles now you should have multiple offerings to look at. Without knowing his game animal desire to hunt the question is a little open ended to choices.

 

[CMRHG]

I've put together a handful of Tikka T3 Lite 300WM. Shooting hornady 180 gr SST ammo around 3100 fps, all 1/2 moa. Burris Fullfield 3x12x56. They kick so I put Witt machine clamp on muzzle brakes on them. Nice lightweight 500 yd rigs for about $1700

 

[skipglo]

For just a Fun gun and some hunting why not just a Vanguard or Howa....sub moa guarantees on both....save him a pile of money and get him where he wants to be.... anything more and he wouldn't be able to appreciate the difference. I'm a big fan of both guns...drop it into an MDT FIELD STOCK .....just me

 

[grizlywinkleman]

My 2 cents is to pick a caliber with lots of factory ammo options regardless of the platform chosen.

 

[HandgunHTR]

Since you (the OP) didn't specifically say it was for hunting, and the fact that your friend isn't much of a rifleman (your words), I am going to go completely away from most here and say he should start with a .223. I would honestly recommend this even if the goal was hunting, but with the caveat that until he becomes a decent rifleman, he shouldn't be making shots past 300. I say this because you have to be a decent rifleman to be able to accurately call wind and maintain your fundamentals to make good shots past there. The headstamp on your brass isn't going to help you much at all until you get those things down.

Get a Tikka with a 1:8 twist or a decent AR with a 1:7 twist quality barrel, buy a bunch of Black Hills or ACC ammo with the 77 grain TMK, a good scope (the SHV would work great) and he will become a decent rifleman with practice. The .223 is perfectly capable to shoot targets or steel to 500 and depending on barrel length will be a fine medium to large game rifle at 300-400 yards, which is more than far enough until he becomes a better rifleman and will want to expand his range anyway. At that point, he can get a new rifle.

If you just cannot stomach shooting a .223, then the Howa Mini in 6ARC, or one of the various 6mm or 6.5 Creedmoor offerings is where I would start.

 

[K.E.C. Darkside]

A new shooter out to 500yds.
6.5 PRC, 280Ai and a 270 or 30-06.
Take him to a sporting goods store and have him handle a few different models.
What will you be hunting?

 

[SecretSquirrel38]

I shoot 500 yards with my CVA Cascade XT 308 Win topped with a Redfield 4.5-14x42 scope (not the Academy ones) with hand loads no problem. That said my longest deer was at 353. You don't need to spend a lot of money to shoot that far.

 

[Straight Shooter]

3200 fps I think puts him in the shoulder thumping category.

 

[Lee Goodwin]

On a modest budget I would get a Ruger set up for long range. 7 prc sounds good. 7mm projectiles seem about right for ballistics and recoil related to heavier bullets. My budget long range rifle is an old 26 inch barrel, Remington 700, 20 MOA base, athlon scope (I like a lot) and hand loads. 300 Winchester Magnum. I need to practice.

 

[spladi]

I have a friend that wants an off the shelf gun that will shoot out to 500ish with box ammo. All my rifles have been put together by gunsmiths and I reload so I'm not sure what to tell him. I did a small amount of research looking at stuff with in his price point and right now leaning toward a Weatherby 307 in 7PRC with a Night Force SHV and eventually having him purchase a turret once I get everything dialed in. Thoughts or suggestions welcomed. Mind you he has no ballistics knowledge and I don't think I will be able to make him much of a rifleman so trying to keep it basic.

I think the 6.5 Creedmoor in a heavy rifle (Ruger LRT) would be a benefit due to its weight and access to ammo off the shelf. Cheaper and also capable would be the Ruger Predator in 7-08. Lighter yet a Ruger Predator .223. Like in the pistol shooting introduction we always suggest starting with the .22 LR not the .357 Mag.

 

[bonie]

6.5 PRC mine is a Browning Hells Canyon LR. sub 1/2MOA with Hornady 147 Match as well as 143 Precision Hunter, that's very impressive to me I only bought them for the empties, so now I load the 143 ELDX for hunting with even tighter groups at times.

 

[ofdscooby]

Thanks for all your replies I enjoyed reading through them. I guess I didn't clarify a few things one being that he has hunted and shot game before just never with a trustworthy( in regards to accuracy) rifle and really just wants a more reliable one and done package. Primary game would be hogs and deer with the hopes of an elk someday. I'm gonna have him shy away from a short action. I've seen large hogs shake off a 6.5 Creedmoor hit even though the 127 LRX is a great pairing with them. We live in California so the copper thing is life here for hunting. I'm still leaning toward the 7PRC since I gotta believe the Hornady CX was in the room when they were developing this round. When the 7mm mag was developed they probably laughed at you if you said someday they'll be shooting solid copper. I just haven't seen a box of 7mm mag with non leaded bullets do that good. Before you jump all over me for that statement mind you I just built a custom 7mm mag that only sees copper and is my California hunting gun. It was made with a little more freebore and I handload with 143 McGuires going 3200. I've seen a lot of votes for the Tikka and I think that means taking a deeper dive looking at Tikka's. Another reason I was leaning toward the 307 is uses a 700 footprint that makes upgrades pretty easy. He hasnt pulled the trigger yet so to speak so well keep mulling it over and hopefully he'll get something soon.