Need some 338 Barnes 210gr tsx or ttsx bullets

[cb4128]

I'm working on a 338 Federal project and need some projectiles. From my research the Barnes 210gr tsx or ttsx seem to be very good options.

Does anyone have some of these they could part with?

Would also consider 185gr tsx as well.

Thanks!

 

[randonee]

I have 1 new box of 210 ttsx and one partial box (mostly full). I don't think I'll be using them, so if you'd like them let me know.

 

[cb4128]

pm sent!

 

[middleofnowhere]

I've been researching a 338 Fed or 358 Win build.

Hammer has their "shock hammer" and "hunter" line of bullets that might be worth your consideration. I haven't looked at availability of Barnes lately as I still have a pretty good stock pile of .338 in 280 grain. If you wanted the heavier, I'd part with some.

.338 Cal-205gr Power Hammer™ - Hammer Bullets

We designed this bullet with the .338 Winchester Magnum in mind. We put a 2mm hollow point in this one, that is relatively deep, for about 60% weight retention and to ensure easy expansion. This bullet will load very nicely for feeding from the magazine and have a great velocity for hunting...

hammerbullets.com

 

[cb4128]

ok good idea, may look into the hammers. It's going to be an 18" barrel, so I'd prefer to stick with 225 and under at the heaviest to still have some decent muzzle velocity

 

[Gixxerbob]

Barnes Bullets 30430 Tipped TSX 338 Cal .338 225 gr TTSX Boat-Tail 50 Per Box | Black Market Arms

blackmarketarms.com

 

[tvarden]

Sending PM I have 4 boxes if your still looking