Need 34mm Low (.92) rings similar to Seekins

[Roughrice]

I need 34mm Low rings for 50mm objective.
I use 34mm High (1.00) for 56mm on MTU barrel.
Please advise if you know .92 won't work with 50mm.

 

[PlumberEd]

I used a set of .92 (low) Warne 34mm Maxima rings and Weaver type bases to mount a 50mm ATACR scope on my Fierce Fury and had about a dimes worth of clearance. Granted this rifle doesn't have a huge barrel but the objective end of the scope was over the chamber portion of the barrel. So, I think you will be ok.

 

[Roughrice]

Good to hear.
My ATACR is 56mm and is in the 1.00 (high) and has about 3/16"-1/4" clearance over a heavy barrel so I was thinking the low would work but your info gives me confidence that it should clear.
Thank you.

 

[PlumberEd]

Great. On bolt rifles I like to mount my scopes as low as possible.

 

[lancetkenyon]

I use 34mm .92" "low" rings on every 50/56mm obective scope I have ever owned. From #3b to M24 contour.
Vortex Razor Gen 2, Steiner T5Xi, Premier Heritage, Kahles K624i, S&B PMII, etc.

 

[Roughrice]

That's what I need to know!
I only have 2 34mm tubes and both are 56mm OBJ and both are 1.00 height.
All of my 30mm tubes use lows also but have 42-50mm OBJ... .82-.87 ring height is perfect for those.
Needed experienced opinions with 34mm tube and 50mm.
Thanks.
I need to find a set if anyone has a set of lows not being used.

 

[PlumberEd]

Over achiever