• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Muzzle brake and bedding

Thanks Dosh for the offer but I found some of the marine tex gray 2 oz.was 20 dollars but thats probably better then ordering in with the shipping.couple questions with the bedding though.should i just bed the front and the back of the reciever or should i do it all?
 
I do all of it.

With a Vanguard, you must leave a bit of a gap behind the rear of the action, or it will act as a secondary recoil lug. Go look at the action in the stock, and you'll see what I mean.

I usually put 2-3 layers of tape on the back of the action when bedding them to be sure that space stays there. It seems to work well.

Here is one of my posts on bedding tips:
http://www.longrangehunting.com/for...-bedding-block-146012/index2.html#post1026447

And here is a better one:
http://www.longrangehunting.com/forums/f37/bedding-question-127283/index5.html#post899007

I hope that helps.
 
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top