McMillan Xp-100 stock

[Ernie]

With the H-S Pistol stocks, it is a good idea to lay a longer piece of aluminum in the forend channel. With this stock it is more than just setting up T-Nut, as you are strengthening the forend itself. You may need to dremel some foam out, and secure it with Devcon/bedding agent. Depending on how good you are, you may tap the aluminum beforehand. Others might tap it afterwards

 

[ChrisRhodes]

Where do they break,Where does the rockwell break,I have one of those.
I seen an Wichita arms 308 win with a compsite stock break during a IHMSA match beside me ,early 80's Air Capital gun club,first one I and others ever seen,seem to have broke at recoil lug or action screw area,remember stock was pinkish inside.Screwed his finger up,thinking trigger blade took a chunk of finger.he had to leave.Think it was 6# limit back then,no muzzle brakes,I was shooting a 13 1/2" 284 win "Radke" mag n port next to him.Tad handful.

Top of the grip. I don't know why. Laminate should be strong enough. I don't know if it's cheap lam or what. It's plenty thick but almost 50% breakage.