Leupold S1 dials

[YZEATER]

I haven't seen much talk about these. They don't advertise them.
I got the S1 dial for $75 shipped.

It takes place of the coin slot covers on vx II , III and var-x II, III scopes.

You can get them in moa or mil or a custom dial. It only gives you a total of 14 moa adjustment, 1 revolution.

I got it so I wouldn't have to send my scope back in to get exposed turrets put on.

 

[yorke-1]

There's a "collar" on the base of the S-1 dial that you can remove which will allow you to have multiple revolutions. The dial is 3 pieces, the base which threads on to the scope, the "collar" which is held on to the base by set screws, and the actual dial.

There's also a detent ball in the dial which stops the rotation of the dial at 14 MOA. You can rotate it past the 14 MOA point but there's a bit of a bump while you do it.

I ordered 2 of these dials in December of 2016 and they just showed up in April of 2018. Just standard MOA dials too, not custom dials.

 

[YZEATER]

I'll have to see about taking the collar off. I didn't try to go past the stop. I got it after about 5 weeks.

 

[ellison3dpro]

Where did you purchase this from? Trying to find one.

 

[YZEATER]

call leupold.

 

[HuntingG2003]

I haven't seen much talk about these. They don't advertise them.
I got the S1 dial for $75 shipped.

It takes place of the coin slot covers on vx II , III and var-x II, III scopes.

You can get them in moa or mil or a custom dial. It only gives you a total of 14 moa adjustment, 1 revolution.

I got it so I wouldn't have to send my scope back in to get exposed turrets put on.View attachment 97427 View attachment 97428 View attachment 97429

Hello, do you have any recommendation, ideas on where I could find a set of these S1 dials???

 

[HuntingG2003]

I haven't seen much talk about these. They don't advertise them.
I got the S1 dial for $75 shipped.

It takes place of the coin slot covers on vx II , III and var-x II, III scopes.

You can get them in moa or mil or a custom dial. It only gives you a total of 14 moa adjustment, 1 revolution.

I got it so I wouldn't have to send my scope back in to get exposed turrets put on.View attachment 97427 View attachment 97428 View attachment 97429

Hello, do you have any idea, recommendation on where I could possibly find these S1 dials for a Leupold? Any help appreciated.

 

[YZEATER]

leupold is who made them. i seen a post lately that said they are not making them anymore. i would still call. there are other companies that make something similar.

kenton industries is one of them.