Let’s see your coyote rifle!

[James K.]

it's got different glass now, but its an 18" 22 Creed zipping 64gr TGKs at like 3450 or something.
Easily one of my most accurate rifles.View attachment 587431View attachment 587432

SA WEEEEEEEEEET!!!

 

[mack9807]

New rig ready to go , Southern Arizona rifle company 243 .

 

[DSheetz]

I am a fan of side charging AR's

 

[lancetkenyon]

New truck gun.

 

[lancetkenyon]

New truck gun.
View attachment 593067

Definitely "MOC" (Minute of Coyote).
Went out to the steel range today and sighted it in. Zeroed at 150 yds. Once I got it zeroed, went 8 for 8 on a 4" square at 260yds with my 69SMK load for my other AR. These are sub-MOA in my 24". Probably just over MOA in this "pistol".

69 SMK @ 2455fps from an 11.5". I wasn't sure what to expect for speeds. My 24" pushes this load at 3033fps. So 575fps loss with 12.5" less barrel length. About 46fps per 1".

Then I tried my 50gr VMax varmint load. Not quite as accurate, but definitely coyote killers at 260yds. I was about 60% hits on the 4", and the misses seemed just off plate per the dust. Maybe 2MOA? These shoot 3300 in my 24" into about 1MOA. Averaged 2880 (2870-2895). 33fps per 1" barrel loss.

Ripping 20 rounds off in about 60-70 seconds sure heats that suppressor up!

Running those speeds, the 50 Vmaxs are way flatter shooting. And to maintain 1800fps minimum actually extend the distance out just a bit. So I am thinking I will probably run the 50 VMax loads for coyotes out to 300-350 max. Good thing is I already have about 3k rounds loaded up with them.

 

[DUCKMAN11]

Howa 25-06 shooting barnes 80gr ttsx at 3650fps for now. Not bad for a 22" barrel

 

[bsnyder]

Waiting for a thermal but 6arc I'll see lance's 223 and raise to 6arc

 

[DUCKMAN11]

Don't know why the pictures didn't work...

Bolt gun is 25-06 shooting 80gr ttsx at 3650fps. Hold on hair out to 400yds. Not much time to dial between salt wash's and mesquite trees out here. Athlon 4-20 that is one of my favorite cheap scopes on top.

AR is a conglomeration of parts with the main one being a White Oak DMR barrel and bolt and CMC 2lb single stage trigger. 10rnd groups with AAC 77gr otm are .5-.6moa. 2760fps and $12.99 a box. You can shoot out a bullseye with a 20rnd mag pretty quick and easy.

 

[rankin76]

A new look for my 6.5 PRC. It's pretty hard on coyotes!

 

[Rotten]

Here's 3 of my coyote rifles. 1st 2 pics of a model 70 that I made into a 25 creedmore.
2nd is a win m94 made in 1903 chambered in 25-35 that I restored.
And Third is a AR-15 that I put together and painted with the snake skin camo.

 

[ruger300]

My newest addition to my calling rifles. I always wanted a 17rem so I had this one put together.

 

[Calvin45]

Here's 3 of my coyote rifles. 1st 2 pics of a model 70 that I made into a 25 creedmore.
2nd is a win m94 made in 1903 chambered in 25-35 that I restored.
And Third is a AR-15 that I put together and painted with the snake skin camo.

Oh my gosh using a circa 1903 Winchester lever gun quarter bore as a serious coyote rifle is the most awesome thing I've read on this site this week!

 

[Rotten]

Oh my gosh using a circa 1903 Winchester lever gun quarter bore as a serious coyote rifle is the most awesome thing I've read on this site this week!

Hahaha thanks. Unfortunately I haven't actually shot a coyote with it yet. My eyes are not as good as they once we're. I can't see the front post unless it's reflecting light or have glasses on and then I can't see what I'm shooting at

 

[gettintheracks]

My newest addition to my calling rifles. I always wanted a 17rem so I had this one put together.View attachment 608740

What are your rifle ...barrel specs?