Just started reloading, what die set

thanks for the ballistol tip

Yep

And it works great for.case lube for resizing most.of.the.small benchrest cartridges

Clean the brass off.with a clean pad moistened with ballistol and run it right through your sizing.die.

If you are taking it home spray it with ballistol before you leave the range and put it in a zip lock and the carbon will just wipe off when you get home
 
ValleySnyper I must have been half asleep when I answered this post the other night. I read it as you had got a bunch of dies that came with your setup.

A 2 die set will do the reloading.. It will be your choice if you want to get a set with Full Length sizing die or a set with Neck Sizing die. If you have any shell cases you want to use that was not shot in the gun you are loading for a Full Length will be a must.
Good Luck, Be Safe and Happy Shooting.
 
Warning! This thread is more than 8 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top