Glue for pillars?

[grouse]

What glue do you like for pillars on stocks? I have a manners I need to glue the pillars in

 

[Jud96]

I bed mine in place with Devcon.

 

[Gwine]

Same thing I use to bed the action. Usually Devcon.

 

[aushunter1]

Use an epoxy bedding agent, there are quite a few, Devcon, acraglas, JB weld.
They all work.
Id have to say though if your going to do pillars Id be do looking at doing the action at the same time!

 

[slas]

Devcon

 

[cohunt]

elmers? JK

-- I use marine-tex

 

[Wedgy]

A study I read on Accurate Shooter showed after 1 year Marine Tex has less shrinkage than Devcon

 

[MagnumManiac]

I use Devcon 10110 steel bed, it doesn't shrink, go soft or crush over time.

I think it is also the easiest to use, even more so than Acraglass Gel.

Cheers.

 

[Wedgy]

I use Devcon 10110 steel bed, it doesn't shrink, go soft or crush over time.

I think it is also the easiest to use, even more so than Acraglass Gel.

Cheers.

It states the shrink rate on the technical data sheet for Devcon. I like Marine Tex for the smaller containers.

 

[johnnyk]

I used JB Weld of the set of pillars I glued in about ten years ago. It was a laminated wood stock and just last year I glass bedded the whole action with Miles Gilbert bedding kit. Makes for a very stable platform.

 

[SDPlinker]

Devcon 10610 for pillar and action bedding and JB for rail bedding.

 

[WanderingGoatie]

Marine Tex is the best I've used between Acra glass, jb weld, and MT.

 

[muleystalker]

AcraGlass Gel or Devon 10110 are my top choices, Devcon is the most forgiving as fare as getting the mixing ratio right. MarineTex is real finicky about the mixing ratio, I have seen guys not get it right and it not cure all the way.