I have a full custom rifle chambered in 300 Max for sale. Rifle has barrel only broke in. Only shot 2 bullets to get powder pressures. So far it's shooting at 1/2" at 100 yards with no seating depth checks so far at 2820fps. This is with a Berger 205 Elite Hunter bullet and over 3000fps with Barnes 175 LRX bullets. Weight of rifle as seen in the picture is 8lbs 12 oz with scope, rings and bubble level.Hers the build specs :
1. Ruckus GA hunter XM action and bottom metal all black nitrided then all metal cerakoted except bolt
2. Altera stock with flush cups and built in Spartan bipod setup and pillar bedded with Devcon
3. Bartien #3 ss 1-10 twist barrel spiral flutes with 9/16 24 muzzle thread at 20"
4. 2 stage Trigger Tech trigger currently set at 1. 8lbs
5. Spartan bipod long, as the stock is setup for this
6. Little Bastard Gen 2 self timing 3 port break and also a thread adapter 9/16 24 to 5/8 24 for suppressor
Rifle will come with Hornady die set and 50 pieces of the 40 deg 300 max brass made by ADG
Scope, rings, bubble level and a hard case available for extra. On other forums now as well. $4700 plus shipping
1. Ruckus GA hunter XM action and bottom metal all black nitrided then all metal cerakoted except bolt
2. Altera stock with flush cups and built in Spartan bipod setup and pillar bedded with Devcon
3. Bartien #3 ss 1-10 twist barrel spiral flutes with 9/16 24 muzzle thread at 20"
4. 2 stage Trigger Tech trigger currently set at 1. 8lbs
5. Spartan bipod long, as the stock is setup for this
6. Little Bastard Gen 2 self timing 3 port break and also a thread adapter 9/16 24 to 5/8 24 for suppressor
Rifle will come with Hornady die set and 50 pieces of the 40 deg 300 max brass made by ADG
Scope, rings, bubble level and a hard case available for extra. On other forums now as well. $4700 plus shipping
Last edited:
