Niles Coyote
Well-Known Member
Selling my factory FN SPR A1 300wsm, it has a 24" barrel with a JP enterprise brake, bolt knob (assumed to be a badger) and Kristin (spelling???) adjustable cheek.
The first owner had the brake work done by JP, I am not sure who did the bolt but the work looks great. When I purchased it (I am the second owner) it had 189 rounds fired and came with some dies and norma brass. I have fired an additional 143 rounds so the total round count is 332 or very close to that.
The rifle loves 190 berger VLD's as seen in my load development, two 5 shot groups, the tighter of the two measured .19 ctc.
This rifle, I kid you not, has less recoil than my 10 pound 223. The brake is THAT effective. You can spot your own hits even when your position is bad or compromised such as is common in the hunting fields. It's a great rifle but one I use very little so I am selling it to pay a near-future rebuild. It will come with the factory rail but not the pictured bipod.
I would like to make this a package deal, rifle + the following items.
The costs listed are current new prices per midway.
Redding Full Length Sizer Die -29.99
Redding Body Die – 27.99
Redding Competition Seater Die – 97.99
Lee Factory Crimp Die – 11.99
Lee Collet 2-Die Neck Sizer Set – 28.49
RCBS 2-Die Neck Sizer Set – 57.99
RCBS Full Length Sizer Die – 27.99
Berger Hunting Bullets 30 Caliber 190 Grain VLD 100 @ 47.99, 182ct = 87.34
Norma Brass 300 WSM, 100 @ 128.99 These have 2 or 3 firings on them 117ct new cost @ 150.91
Winchester Brass 300 WSM, 50 @ 29.99, 230 new of which 100 are primed and 19 once fired, 250 new @ 149.95
Ammo Boxes 8 @ 27.92
Total invested in supplies ~ 698.55
This will ship from my FFL to yours, unless you live in Michigan/Indiana and want to do a face to face.
I will need a signed copy of your FFL dealer's license that you want it shipped to along with payment. My dealer will ship UPS insured and a tracking number will be provided.
1650 for it all, by USPS money order (that's the one from the post office).
I am not interested in braking up the package unless I have a buyer for the rifle, in which case I will repost supplies in a new thread.
Also, due to how slow this site loads at home it is best to email me at [email protected]
The first owner had the brake work done by JP, I am not sure who did the bolt but the work looks great. When I purchased it (I am the second owner) it had 189 rounds fired and came with some dies and norma brass. I have fired an additional 143 rounds so the total round count is 332 or very close to that.
The rifle loves 190 berger VLD's as seen in my load development, two 5 shot groups, the tighter of the two measured .19 ctc.
This rifle, I kid you not, has less recoil than my 10 pound 223. The brake is THAT effective. You can spot your own hits even when your position is bad or compromised such as is common in the hunting fields. It's a great rifle but one I use very little so I am selling it to pay a near-future rebuild. It will come with the factory rail but not the pictured bipod.
I would like to make this a package deal, rifle + the following items.
The costs listed are current new prices per midway.
Redding Full Length Sizer Die -29.99
Redding Body Die – 27.99
Redding Competition Seater Die – 97.99
Lee Factory Crimp Die – 11.99
Lee Collet 2-Die Neck Sizer Set – 28.49
RCBS 2-Die Neck Sizer Set – 57.99
RCBS Full Length Sizer Die – 27.99
Berger Hunting Bullets 30 Caliber 190 Grain VLD 100 @ 47.99, 182ct = 87.34
Norma Brass 300 WSM, 100 @ 128.99 These have 2 or 3 firings on them 117ct new cost @ 150.91
Winchester Brass 300 WSM, 50 @ 29.99, 230 new of which 100 are primed and 19 once fired, 250 new @ 149.95
Ammo Boxes 8 @ 27.92
Total invested in supplies ~ 698.55
This will ship from my FFL to yours, unless you live in Michigan/Indiana and want to do a face to face.
I will need a signed copy of your FFL dealer's license that you want it shipped to along with payment. My dealer will ship UPS insured and a tracking number will be provided.
1650 for it all, by USPS money order (that's the one from the post office).
I am not interested in braking up the package unless I have a buyer for the rifle, in which case I will repost supplies in a new thread.
Also, due to how slow this site loads at home it is best to email me at [email protected]
