Effect of Suppressor on Hand Loads

[ddman]

What shotgun cans do you have? Or are they integral?

Silencerco salvos

 

[ajkellerusmc]

Maybe I'm just picky, but there is no way I'm using a " regular" can on a gas gun. One shot and all your ammo is dirty in the magazine. I was completely disgusted the first time I tried it. Couldn't believe people were that clueless...

I run two types of cans, the absolute quietest for bolt guns and a flow through style for ARs. Lots of lower back pressure cans now. I won't put anything else on an AR and consider those that do soft in the head. Have to clean the AR more than I want to anyway, without making them a carbon factory after 10 rds. Complete idiocy. YMMV

Boy you sure are abrasive

 

[khart1988]

Ya, that's kind of what I've seen to. And ya the jk has terrible reviews. Pretty much have to run it wet to get much. No thanks.

Have you shot any of the integrals on shotguns?

I have not. It's funny, I've never cared for the idea of integral silencers for the exact reason that I believe Kevin Brittingham and Q made a youtube video on. Mainly good subsonic ammo available so you don't have to castrate lighter loads with gas bleed-off to avoid the supersonic crack.

I could see it being somewhat relevant for some shotgun ammo, as most payloads are relatively high and hover right at or over the speed of sound, and therefore could benefit from a slight reduction in velocity with the added backpressure to still cycle semiautos. I would be interested to see some pattern testing and such for an integral, especially if you can swap chokes on the end.

I'm sure someone somewhere in a machine or welding shop has made a good shotgun silencer, but unfortunately our industry as a whole is rather lacking of good (and creative) engineers, and thus the major companies seem uninterested in throwing resources at the shotgun market.

I'm not going to claim I have a ton of experience with various silencers first-hand, but between Pew Science, Thunderbeast's Silencer Summit Results, and others, there's now a lot of apples-to-apples comparison data available to the buyer. From an engineering perspective, good proven designs are fairly easy to spot, and there are a few dead giveaways if a lack of thought or effort went into a model.

Example: If your mount and muzzle device combo weigh half a pound or more, and add over an inch of unnecessary length to the barrel, I don't trust that your engineers had the capability to design the actual silencer worth a **** either.