backwoods83
Well-Known Member
- Joined
- Jan 8, 2011
- Messages
- 3,491
Started with brand new Savage 116FCSS 7mm Rem Mag then added
28" .800" contour 1:10 twist polished stainless McGowen barrel chambered in 270 Weatherby Magnum.
New SS Savage barrel nut.
conversion to target accutrigger with new trigger body, springs, and sear.
S&K (LRV) long range varminter laminate stock, inleted, dual pillar and glass bedded.
Allen nylon sling.
Weaver 1 piece rail
Leupold LW rings
Nikon Monarch 6-24X50 SF FC w/ flip up caps.
28 factory weatherby 150 grain spire point rounds.
30 reloads with 140 accubonds
2 empty cases.
RCBS full length and seater dies.
Redding neck die.
box of accubonds with 14 left. Also added stainless trigger gaurd since the photos.
Shot less than 40 rounds, 1 of the 3 shots groups measured when testing was .414"
Pics Weatherby pictures by hoss5 - Photobucket
Asking $850.00+ shipping Firm for everything shown in photos except the action and the rest its sitting on. All you need is a used savage action and you'll have a pretty low budget shooter!
28" .800" contour 1:10 twist polished stainless McGowen barrel chambered in 270 Weatherby Magnum.
New SS Savage barrel nut.
conversion to target accutrigger with new trigger body, springs, and sear.
S&K (LRV) long range varminter laminate stock, inleted, dual pillar and glass bedded.
Allen nylon sling.
Weaver 1 piece rail
Leupold LW rings
Nikon Monarch 6-24X50 SF FC w/ flip up caps.
28 factory weatherby 150 grain spire point rounds.
30 reloads with 140 accubonds
2 empty cases.
RCBS full length and seater dies.
Redding neck die.
box of accubonds with 14 left. Also added stainless trigger gaurd since the photos.
Shot less than 40 rounds, 1 of the 3 shots groups measured when testing was .414"
Pics Weatherby pictures by hoss5 - Photobucket
Asking $850.00+ shipping Firm for everything shown in photos except the action and the rest its sitting on. All you need is a used savage action and you'll have a pretty low budget shooter!
Last edited:
