I have an Owens Amory custom 7mm SAUM for sale. The following are the build components
Gunwerks GLR short action, pinned rail (their flagship action - usually not available to purchase)
Proof Research Sendero contour, 1-9 twist, finished at 24", threaded 5/8x24 with blended 3 port break
Triggertech Special trigger
McMillan A3 edge fill stock, atlas rail on the front w/ flush cup and rear swivel stud, custom painted
Pillar and Devcon bedded
m5 bottom metal (unsure of manufacturer)
Weight is 6.75 lbs as described
Selling because I use my 6.5 SAUM more and this one needs a good home.
I can count my brass for exact round count, but it's around 65.
Load development was done with 162 gr eldm's, adg brass, federal 210m primers and RL-26 - settled on 2,870fps avg, shooting consistently in the 0.2's. (full load data will go to the buyer)
Shot out to 565 yds and it was holding under 1/2 moa.
Asking $3,750 FTF in the DFW area, or can ship for additional cost
*100 pieces of new ADG brass, Whidden FL Bushing dies and 400 + 162gr ELDMs available for purchase as well (will negotiate with the buyer of the rifle first)
Pics to follow
Gunwerks GLR short action, pinned rail (their flagship action - usually not available to purchase)
Proof Research Sendero contour, 1-9 twist, finished at 24", threaded 5/8x24 with blended 3 port break
Triggertech Special trigger
McMillan A3 edge fill stock, atlas rail on the front w/ flush cup and rear swivel stud, custom painted
Pillar and Devcon bedded
m5 bottom metal (unsure of manufacturer)
Weight is 6.75 lbs as described
Selling because I use my 6.5 SAUM more and this one needs a good home.
I can count my brass for exact round count, but it's around 65.
Load development was done with 162 gr eldm's, adg brass, federal 210m primers and RL-26 - settled on 2,870fps avg, shooting consistently in the 0.2's. (full load data will go to the buyer)
Shot out to 565 yds and it was holding under 1/2 moa.
Asking $3,750 FTF in the DFW area, or can ship for additional cost
*100 pieces of new ADG brass, Whidden FL Bushing dies and 400 + 162gr ELDMs available for purchase as well (will negotiate with the buyer of the rifle first)
Pics to follow
