Custom 6.5 PRC w/extras

[Jsmith410]

I have a custom 6.5PRC I have been debating on listing but I rarely shoot it. Just under 100 rounds through it. It shoots factory Hornady eld-m sub moa (groups are usually around 0.61") and eld-x just under an inch. I have not reloaded for it yet but do have all the components. I will weigh it and update ad. See below.

Bighorn TL3 SA DLC
Proof sendero CF 24" 1:8 threaded
Triggertech Special
Redsnake dbm
Manners EH6A 13.5 lop
Area 419 hellfire brake

The smith work was done by Bill Young in NC. The bottom metal and action have been bedded.

I do have an action wrench and standard bolt head as well (new) so you can have another barrel spun up and change it in a matter of minutes.

***ONLY AVAILABLE AS A PACKAGE***
I have 3 boxes of virgin 6.5 PRC ADG brass & two sets of dies (Redding & RCBS). If the buyer close to central KY I have some RL26 unopened that I can make a package deal with.

Scope/rings and bipod not included.

Rifle only $3750 shipped/insured conus.
Rifle w/ reloading pkg- $4250



No trades unless you have a Kubota 3901

 

[Jsmith410]

8lbs 2oz on bare rifle w/o brake

 

[Jsmith410]

Ttt

 

[Jsmith410]

Ttt

 

[Jsmith410]

final drop $4000 for the whole package.

 

[Jspeed]

Where in KY are you?

 

[Jsmith410]

Where in KY are you?

Central, not far from Frankfort, Lexington, or Louisville.

 

[Jspeed]

Curious….I've got family in Franklin, Fayette, Wayne, and Pulaski counties….

 

[Jsmith410]

Curious….I've got family in Franklin, Fayette, Wayne, and Pulaski counties….

Im in woodford which borders Fayette.

 

[Jspeed]

Very interested in the rifle….would really like to see the reamer print….in lieu of a reamer print, what does fired brass diameter measure at he .200" line…. Thanks

 

[Fubarredz]

I'd really like just that stock it's sweet.

 

[Jsmith410]

Very interested in the rifle….would really like to see the reamer print….in lieu of a reamer print, what does fired brass diameter measure at he .200" line…. Thanks

0.288"

 

[Jsmith410]

More pics of pkg. scope/rings not included. Powder only FTF.

*****correction in dies*****
RCBS Gold Metal Seat Die (32149)
FL Die Set (32101)

 

[Jspeed]

0.288"

Should be more like .53?" I believe….SAAMI spec for chamber is.533"…some are using a reamer that takes this a bit further to .535"