What's your website? This slow mo on it?
@CRP003 BOI inspired
- Thread starter FEENIX
- Start date
Help Support Long Range Hunting Forum
We don't have a website, our testing is done in our warehouse and tunnel. We use Claravision camera setup. I run a full time business and these are primarily hobbies. If have any questions please reach out.
Last edited:
Great, some of our products come out of MooseJaw SK. Worked in Flin Flon for a short time.
Last edited:
Left Hand Dave
Well-Known Member
So is this a fix for bullets that didn't perform to your liking that your selling? Or did I miss read the post?
LHD,
The gentleman had asked what oil we are using? I simply cannot divulge our formula or injection process. However, I have offered many other methods and substances that work well "free" (I will not try to market or sell my products without being a sponsor.) Some of those "oils" produced up to 8% larger expansion with a more violent "pop" after impact as seen with our Claravision. Its not about what bullets didn't perform to my liking. It's about providing a solution to some bullets that do not perform as well as other even within their own brand. We as hunters are always trying to raise the bar on our tools we use.
We tried using oils on pure lead hollow points to cup and core to bonded and then monos. Lead simply responded nearly the same with or without the oils/solutions we tried. Copper alloys varied among brands and results because there are so many variables. What we do know is there are products that facilitate expansion without question. Is it needed? That could be said for everything we do. I don't want to get into weeds too much. But understand solutions to some types of bullets are coming even though we may not feel a solution is needed!
The gentleman had asked what oil we are using? I simply cannot divulge our formula or injection process. However, I have offered many other methods and substances that work well "free" (I will not try to market or sell my products without being a sponsor.) Some of those "oils" produced up to 8% larger expansion with a more violent "pop" after impact as seen with our Claravision. Its not about what bullets didn't perform to my liking. It's about providing a solution to some bullets that do not perform as well as other even within their own brand. We as hunters are always trying to raise the bar on our tools we use.
We tried using oils on pure lead hollow points to cup and core to bonded and then monos. Lead simply responded nearly the same with or without the oils/solutions we tried. Copper alloys varied among brands and results because there are so many variables. What we do know is there are products that facilitate expansion without question. Is it needed? That could be said for everything we do. I don't want to get into weeds too much. But understand solutions to some types of bullets are coming even though we may not feel a solution is needed!
Buttermilk
Well-Known Member
Hmm 
I'm thinking someone is really having some fun here.
I'm thinking someone is really having some fun here.
Correct I enjoy improving and implementing new ideas. Today I'm trying modifications on 22Mag rimfires. EnjoyHmm
I'm thinking someone is really having some fun here.
