Oh yeah I'm sure they are mounting a charge and gonna suggest I build a 6.5 Needmoor
Cranking up the RPM
- Thread starter Swamplord
- Start date
Help Support Long Range Hunting Forum
I have tried, but still cannot understand the Barrel Burner argument. 4000FPS = Throat erosion = 
3,500 rounds down the same barrel at 2650FPS =
I would rather to have loved and lost than to have never loved at all.
3,500 rounds down the same barrel at 2650FPS =
I would rather to have loved and lost than to have never loved at all.
I just got a box of 100 rpm brass last week for the 30cal version. You plan on range data? Thanks for the post
Where did you find brass?
Andrew Massi
Well-Known Member
I found 150 pieces at sportsmans warehouse and ordered another 140 once fired from weatherby. The once fired were $1 each bit they had a 20% off coupon going so down to .80.
Weatherby seems to have a pretty good stock so dealers should be getting restocked soon.
Andrew Massi
Well-Known Member
Awesome!!! What's the coal on the 7mm?
Feenix is all over it. Looks like decent stuff
snox801
Well-Known Member
Guys screaming barrel burner at 25 cal
I was already thinking I'm just missing a insanely fast 6mm. Launch a 107 hammer out of it and see what happens.
I was already thinking I'm just missing a insanely fast 6mm. Launch a 107 hammer out of it and see what happens.
25WSM
Well-Known Member
That 25 does look nice and should be close to the same as a Roy but with the standard bolt. Will turn any old 270win into a real rifle.
Shep
Shep
Andrew Massi
Well-Known Member
3800?
I would think so
Andrew Massi
Well-Known Member
Norma.
I ran 6 hot reloads through one piece with a 3 thou bump and primers still snap on place
