• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Burris Signature HD 3-15x44

You lift the turret to adjust and Burris says yes on ZS.


Target Knobs with Zero Click Stop
Applies to 3-15x and 5-25x models
The Target windage and elevation knobs are designed for precise adjustment and feature a Zero Click Stop. The click value for each knob is indicated on the dial.
1. Use the 1.5mm hex wrench supplied with the scope to loosen the three (3) set screws located just under the top of the cap.
2. Pull up to remove the
turret cap. Under the
cap is the Zero Click
Stop ring with three
additional set screws.
Loosen these screws with the 1.5mm hex wrench. Loosen the screws enough so that the collar turns freely. Rotate the ring clockwise until it stops. Snug the set screws. Do not overtighten. Your Zero Click Stop has now been set.
3. Replace the turret cap, align the "0" with the index mark and snug the three set screws.

 
They are low profile, you do pull up to adjust and it has ZS. These are what Burris is calling target knobs. No other choice on this model.
 

Attachments

  • C7A55A7F-F7B1-40BE-B3E4-D687869DCDF6.jpeg
    C7A55A7F-F7B1-40BE-B3E4-D687869DCDF6.jpeg
    122.5 KB · Views: 59
The illuminated model has a taller elevation turret they call a target turret with a hard zero stop. It also still has push and pull to unlock. The low profile turrets don't have a zero stop but they do have the push/pull lock.
 

Attachments

  • A26B5D46-AC11-4AE1-BB54-8695B1C021E5.jpeg
    A26B5D46-AC11-4AE1-BB54-8695B1C021E5.jpeg
    74.6 KB · Views: 40
Top