Bullet Not Feeding Properly

[bill123]

This is a simple fix and we have since zero'd in on this issue. We had a batch of new springs that were overly compressed from our vendor and not creating enough spring pressure. We have since fixed this, but a batch of mags did go out with light spring pressure.

Open up the magazine and just stretch that spring out and you'll be all set. This is particularly effecting 7PRCs in long actions.

Here's how to open up the magazines:

Apologies for any inconvenience. Reach out to us directly with any questions.

I actually spoke with you on the phone about this issue with a 7PRC that I built. It was a very easy fix. I appreciate your help!

 

[geraldhawaii]

Frog4aday, thank you, just saw that now.

aloha

 

[geraldhawaii]

Thank everyone again. Hawkins, andbill 123, will be stretching the spring....

aloha

 

[geraldhawaii]

PROBLEM SOLVED. Once again, I really appreciated everyone's suggestions. I did as Hawkins suggested, and stretched out the spring. Cycled over 20 rounds with single, double and triple bullets in the mag. Mostly went with single bullet, as that was the problem. Zero jams. It's all good.

Aloha

 

[HawkinsPrecision]

We hate that you had to dig into the magazine, but glad it was working well. Apologies on issue but glad it was an easy fix.!