bedding full action question

[gohring3006]

No problem! If you need anymore help just let me know! Look forward to your bedding job. What's the specs for your build?

Actually I'm not building yet, I have a sub moa TC Venture 30-06 and Boyds offer stocks for them now so I'm going to order one kinda like my birthday present to myself. Then order a brake and have it installed. If it all works out with the stock I'm going to build a heavy barreled .284 win.long action This spring and do a Boyds on it. I have everything to reload a .284 might as well build one. I was very lucky on my TC its sub moa with many different loads out to 500yrds I shoot it to 1000 at least once a month it hits 1moa plates consistently. So I thought I would put a pretty stock on it.

 

[Clay Target Guy]

I pour my pillars as well and always have. I do things a little different though, I use inletting screws instead of actions screws when pouring. I use rubber tube to hold everything in place while it dries, and then like was said before, I come back and drill the holes out for clearance.

 

[Clay Target Guy]

In this picture if you look close, you can see the "pour" never stops and goes right threw the hole.

 

[Clay Target Guy]

here is a little better picture

 

[Jud96]

here is a little better picture

That's exactly what our bedding looks like when its done. There are different methods you could do it, but it all looks and works the same in the end haha.

 

[Jud96]

Actually I'm not building yet, I have a sub moa TC Venture 30-06 and Boyds offer stocks for them now so I'm going to order one kinda like my birthday present to myself. Then order a brake and have it installed. If it all works out with the stock I'm going to build a heavy barreled .284 win.long action This spring and do a Boyds on it. I have everything to reload a .284 might as well build one. I was very lucky on my TC its sub moa with many different loads out to 500yrds I shoot it to 1000 at least once a month it hits 1moa plates consistently. So I thought I would put a pretty stock on it.

Sounds like it'll be a good rig.gun)

 

[gohring3006]

here is a little better picture

do you pour the pillars seperate from the action bedding like Jud. Or do you do it all in one process?