Time to sell several years of accumulation of take-offs, unfinished projects, and orphan barrels. All prices are shipped and OBO. Ask all the questions you want. I'll do my best to answer them.
From the top....
6.5-284 Shilen, 8-twist, 24", Sendero contour, 1.250" shank, .820" at muzzle. Round count is very near 150. This barrel shot 49 grains of H4350 and 120 TTSX into 1/2". I'm the second owner. I do not know who chambered it. $SPF
Krieger 30-06, 11-twist, 24", 2.00" shank, .620" at muzzle. Round count is unknown. I'm the second owner. I do not know who chambered it. It's been some time since I worked with this barrel, but I remember it shot well. That's really all I'm comfortable saying since I can't dig up anything from my notes or find any old targets. $140
Remington 300 WSM, 26", Remington Varmint Contour. Round count is unknown. Shot Federal Fusion factory ammo at around .75". $90
Remington 300 RUM, 26", Remington Magnum Contour, Round count is zero. Scuffed from pulling from action, but not severely. $50
Hart 300 RUM, 25.25", threaded 3/4x28 TPI (I have a Badger Thruster threaded for this for $60 more), 12" twist, .860" at the muzzle. Bought this on a whim with the intention of cutting to a 24' WSM parts project. This is the text from the original listing over on LRH.com -"Hart Stainless chambered in 300Rum, barrel has around 200 rounds down it. Threaded for rem 700 action and threaded for brake. $100
"Prior to a 300rum, it was chambered for a 30 J and W wildcat that had around 200 rounds down it when it was 28, barrel was cut and rechambered to 300rum and is approx 25.5" now. I believe it is a 12 twist. Barrel taper is 1.25" shank straight to approx .84-.86 at muzzle.
Very easy cleaning barrel shoots at or under 1/2 moa with 180TTsx and 95 grains retumbo and cci250 primers at 3300fps. Smith says slight throat erosion and slight crackling but shootable and it shoots very well but wanted to build a 338RUM so oredered a 30" rock creek."
Unknown maker. Stainless chambered in 257 Roberts, unstamped. 24.5", 10 twist, 1.25" shank, .712" at the muzzle. This came off a donor purchase. Don Geraci pulled it and guessed it to be unfired. I don't know if that is the case or not. $125
6.5 Shilen blank. Match. CM. #3 contour. 8 twist. 25.75 total length. $165.
Remington 6-284. 9-twist. Remington Varmint contour. This began it's life as a .243 Varmint Special. Was rechambered to 6-284 by the original owner. I don't know how much he shot it, But I shot it 50-75 times. It's a really great shooting factory tube. Honest .5" shooter with 70 BTs'. I'm going to build a lighter 6-284. It has rear sight holes filled with plug screws. $90
From the top....
6.5-284 Shilen, 8-twist, 24", Sendero contour, 1.250" shank, .820" at muzzle. Round count is very near 150. This barrel shot 49 grains of H4350 and 120 TTSX into 1/2". I'm the second owner. I do not know who chambered it. $SPF
Krieger 30-06, 11-twist, 24", 2.00" shank, .620" at muzzle. Round count is unknown. I'm the second owner. I do not know who chambered it. It's been some time since I worked with this barrel, but I remember it shot well. That's really all I'm comfortable saying since I can't dig up anything from my notes or find any old targets. $140
Remington 300 WSM, 26", Remington Varmint Contour. Round count is unknown. Shot Federal Fusion factory ammo at around .75". $90
Remington 300 RUM, 26", Remington Magnum Contour, Round count is zero. Scuffed from pulling from action, but not severely. $50
Hart 300 RUM, 25.25", threaded 3/4x28 TPI (I have a Badger Thruster threaded for this for $60 more), 12" twist, .860" at the muzzle. Bought this on a whim with the intention of cutting to a 24' WSM parts project. This is the text from the original listing over on LRH.com -"Hart Stainless chambered in 300Rum, barrel has around 200 rounds down it. Threaded for rem 700 action and threaded for brake. $100
"Prior to a 300rum, it was chambered for a 30 J and W wildcat that had around 200 rounds down it when it was 28, barrel was cut and rechambered to 300rum and is approx 25.5" now. I believe it is a 12 twist. Barrel taper is 1.25" shank straight to approx .84-.86 at muzzle.
Very easy cleaning barrel shoots at or under 1/2 moa with 180TTsx and 95 grains retumbo and cci250 primers at 3300fps. Smith says slight throat erosion and slight crackling but shootable and it shoots very well but wanted to build a 338RUM so oredered a 30" rock creek."
Unknown maker. Stainless chambered in 257 Roberts, unstamped. 24.5", 10 twist, 1.25" shank, .712" at the muzzle. This came off a donor purchase. Don Geraci pulled it and guessed it to be unfired. I don't know if that is the case or not. $125
6.5 Shilen blank. Match. CM. #3 contour. 8 twist. 25.75 total length. $165.
Remington 6-284. 9-twist. Remington Varmint contour. This began it's life as a .243 Varmint Special. Was rechambered to 6-284 by the original owner. I don't know how much he shot it, But I shot it 50-75 times. It's a really great shooting factory tube. Honest .5" shooter with 70 BTs'. I'm going to build a lighter 6-284. It has rear sight holes filled with plug screws. $90
Last edited:
