Barrel Harmonics Testing

[cohunt]

If using both a muzzle brake and suppressor ( depending on situation)-- then one of the rubber donut tuners would probably work best as you could use it with both.
Also, if you had 2 loads ( like a berger for target and a hammer for hunting)-- you could easily move the donut around for best performance as long as you are documenting where each load/muzzle device location was best .

 

[Hard Head]

Pete.......Revisited this thread...... very interesting.....carefully and accurately weigh magneto speed...... duplicate it`s weight with something to fit on barrel non obtrusive.... .500"MOA+ is too much to give up without trying to duplicate.....

It's gone,Bought a Rergara HMR Wilderness Carbon in 7mm prc shoots

Pete.......Revisited this thread...... very interesting.....carefully and accurately weigh magneto speed...... duplicate it`s weight with something to fit on barrel non obtrusive.... .500"MOA+ is too much to give up without trying to duplicate.....

It's gone!! I bought a Bergara HMR Wilderness Carbon in 7mm prc. It shoots 180 Hornady's like darts,mbarrel has never got hot,just barely warm after 1 30 round try in 30 minutes,average for 30 was 2895 s.d. was 18.25 and all in a .995 group. The thing I love about it is it is almost 3#'s liter than it steel brother,It loves Staball HD, Pete