• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Ballistic app not same as the shot? Help

This seems to be going nowhere. I suggest you do the following. Shoot a target at 100yd zeroed. Set up another target (or the same one and shoot 3 rounds WITHOUT changing anything on the scope. Determine the center of the group and measure from point of aim. With that data we can work on the app issues.
 
I Iooked at a scope you quoted on your previous post. It shows in MILs, not MOA. Is MILs what you have? It should say on the scope adjustments. If so, each click is part of a mil. usual clicks are .1 mils, .36 inches at 100 yards.
Can you verify you have either?
It's a 1/8 clicks MOA scope Trijicon 5-50x56 tenmile It's not listed in the app. So I input the closet there was a 5-25x50 ten mile 1/8 MOA We are heading to the range now to shoot over the chronograph and reconfirm the 100 yard zero and get actual velocity numbers.
This seems to be going nowhere. I suggest you do the following. Shoot a target at 100yd zeroed. Set up another target (or the same one and shoot 3 rounds WITHOUT changing anything on the scope. Determine the center of the group and measure from point of aim. With that data we can work on the app issues.
 
After going through rechecking all information here is what we're working with. Now velocity we used is what it took to match actual shot.
 

Attachments

  • 8E001F07-2D81-4EED-A784-9B4F7A52432D.png
    8E001F07-2D81-4EED-A784-9B4F7A52432D.png
    79.9 KB · Views: 47
Ok we chronograph 6 rounds at 100 yards the pictures show the list and velocities
 

Attachments

  • 678E2DB9-B452-4131-9646-F868B47B2B18.jpeg
    678E2DB9-B452-4131-9646-F868B47B2B18.jpeg
    1.3 MB · Views: 60
  • D1250BB6-7E75-4A40-8DEC-E3A0F82C7A38.jpeg
    D1250BB6-7E75-4A40-8DEC-E3A0F82C7A38.jpeg
    3 MB · Views: 77
  • 1A93F00C-62D0-4F27-AD65-304DACE5FF80.jpeg
    1A93F00C-62D0-4F27-AD65-304DACE5FF80.jpeg
    1.7 MB · Views: 61
Top