I'm very familiar with ASG's stuff.No, all Luke's stuff is .45
With my 45cal, I'm sending 350gr XLD's at 3,000fps with H4895.Dude, 3000FPS with a 325-gr bullet? Better get some shoulder protection!
Above is some good advice. I would definitely put one in.Are they "necessary"? No, however I've got an 80gr powder chamber in mine. The powders that I use (Benchmark, IMR 8208 XBR & H4895) all require powder charges MORE than 80 grains using 300 & 325 grain bullets…..which puts the bullet a little ABOVE the chamber. You DO NOT want the bullet inside the chamber the least little bit or you'll have problems. The theory behind powder chambers is that a short, fat powder column will burn more efficiently than a long powder column and result in less "fouling". I'm currently testing that theory .
I have bugged him so much lol. I'm just trying to gather as much info on my own as possible.Not to denigrate any advice given here, but your best bet on it is going to be whatever Luke recommends. He is the expert on them.
I had him add a 3 port side discharge break but it's going to be suppressed almost alwaysVery doable Luke is a great guy to deal with. I could not shoot mine with out a break I tried about 10 shots. That was enough for me. Sent it back and had one installed FYI.
I watched a YouTube video of a guy using rl17 to reach ridiculous velocities lol. Took a ton of powder thoughWith my 45cal, I'm sending 350gr XLD's at 3,000fps with H4895.
I can shoot the 350's at 3,200fps shooting RL17.
LR Customs T-REX CSTM muzzle brake tames all that recoil.
I think I'm going with an ag composites adjustable armor if I can ever get them to answer the phones or call me backWhat stock you going to put it in