Anyone have a CLOUDRAY FIBER LASER ENGRAVE?

[Coyote Shadow Tracker]

Anyone using Cloudray (or other Brands) Fiber Laser Engraver?
Just looking for your use of the Laser and equipment/Acessories.
You can PM us and we can then talk on the phone.
Thanks
Len & Jill

 

[cb186]

I have a 30w mopa fiber laser that I bought specifically for marking barrels. I bought it with the rotary axis, but haven't set it up yet. I believe it will work better/faster/more consistent once set up, as opposed to the rather basic setup I have now, but it still turns out good.

I bought mine off of eBay for ~$3600, as I feel that they are all pretty much the same(chinesium), no matter where you buy them.

 

[Coyote Shadow Tracker]

I have a 30w mopa fiber laser that I bought specifically for marking barrels. I bought it with the rotary axis, but haven't set it up yet. I believe it will work better/faster/more consistent once set up, as opposed to the rather basic setup I have now, but it still turns out good.

I bought mine off of eBay for ~$3600, as I feel that they are all pretty much the same(chinesium), no matter where you buy them.

Nice!!!
We have a CloudRay 60W MOPA. We have the D-80 Rotary with a Tailstock and Base Plate. Also have (5) different Lens for different materials.
We switched from Cad2 to "LightBurn" If you need information on Laser Engraving/Marking you can go to "LightBurn For Galvo Crash Courses" and also join "Laser Master Academy" there is a lot of good information and tutorials.