-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Another Barrel Cooling Thread But I had to, couldn't help myself...
- Thread starter Muddyboots
- Start date
Help Support Long Range Hunting Forum
Brother Buckwheat
Well-Known Member
- Joined
- Jan 9, 2014
- Messages
- 67
Go ahead "flame" away at my suggestion, I don't go to a "range" with others overseeing my every move. My 800 acres is plenty private.
No way will the barrel be hot enough to ignite the gas unless you have the hose flowing when you immediately open your bolt, and then I still don't believe it would be hot enough. One quick blast would cool the barrel plenty, I guess I have time to let my barrel cool though. Me being slow and all.
No way will the barrel be hot enough to ignite the gas unless you have the hose flowing when you immediately open your bolt, and then I still don't believe it would be hot enough. One quick blast would cool the barrel plenty, I guess I have time to let my barrel cool though. Me being slow and all.
1PD hunter
Active Member
Varmint Hunter
Well-Known Member
I've used barrel coolers and chillers for awhile but they moved very little air and were a waste of money IMO. I gave them all away.
Currently I'm using a small air mattress inflator that has an internal battery and recharges with a USB cord. I use a flexible hose that's similar to surgical tubing and just insert it through the receiver. It works great and you can really feel the air moving at the muzzle. It was purchased from Amazon.
Because the battery doesn't last as long as I'd like, I used a USB splitter off of my LabRadar battery and run a line to the inflator which greatly extends the run time. Using the splitter doesn't seem to put a dent in the LabRadar battery.
This cheap, simple and effective method is worth a look.
Currently I'm using a small air mattress inflator that has an internal battery and recharges with a USB cord. I use a flexible hose that's similar to surgical tubing and just insert it through the receiver. It works great and you can really feel the air moving at the muzzle. It was purchased from Amazon.
Because the battery doesn't last as long as I'd like, I used a USB splitter off of my LabRadar battery and run a line to the inflator which greatly extends the run time. Using the splitter doesn't seem to put a dent in the LabRadar battery.
This cheap, simple and effective method is worth a look.
