amp users for answers

[ARlife4me]

thinking about getting an amp for custom brass and would like feedback about pros and cons of the system.

i see there are code for preloaded info and codes for what each of your brass have generated for reuse for next use? question is when changing shoulder angle and/or neck size what is needed and how is this done?

more questions will follow after posted responses most likely.

i'm wanting a good understanding of the process before committing a purchase as i'm a long way from anyone that could be of an in-person help?

 

[PddPdd]

thinking about getting an amp for custom brass and would like feedback about pros and cons of the system.

i see there are code for preloaded info and codes for what each of your brass have generated for reuse for next use? question is when changing shoulder angle and/or neck size what is needed and how is this done?

more questions will follow after posted responses most likely.

i'm wanting a good understanding of the process before committing a purchase as i'm a long way from anyone that could be of an in-person help?

I always use the Aztec mode (determines custom settings via a sacrificial piece of brass) for any new piece of brass or any changes to previously tested brass. Because....

My experience is no two different brass brands tested, return the same setting even though they are same caliber.

I would expect either shoulder angle, or neck thickness changes, would test with different results.

Hope that answers your question.

 

[ARlife4me]

I always use the Aztec mode (determines custom settings via a sacrificial piece of brass) for any new piece of brass or any changes to previously tested brass. Because....

My experience is no two different brass brands tested, return the same setting even though they are same caliber.

I would expect either shoulder angle, or neck thickness changes, would test with different results.

Hope that answers your question.

is there different adapters that are used or is it a just insert and let the machine do its thing?

 

[Teekerguy]

is there different adapters that are used or is it a just insert and let the machine do its thing?

Different pilots for different cartridges they have good info on there website

Cons- price
Pros- fast, consistent, easy and probably most accurate on the market

Don't regret buying mine at all. I can do 50 of my 280ai brass in about 6 minutes and even faster on the smaller cartridges