RH300UM
Well-Known Member
Has anyone have a list of brass (by lot) that they have analyzed in one area they lived in them moved and have those codes be different with the same lot of brass? Across the board?!
Assuming all have the same number of firings, you can still have a wide variation in a big lot. Do you go through, chose a representative case after each firing and burn it? Or are you comparing a code from 1x brass to 3x? Did you pull a representative case to burn each time? I ask because I'm genuinely curious. I've seen on other forums where people have questioned the efficacy of the AMP simply because they burned more than one case and got a different aztec code.Yes
Have a set of codes for a large lot of brass in one area of living at then move and have that same lot give a very different code at the new residence
This is what I think the biggest issue isIt makes me wonder also, if by moving to a different power grid, if maybe the machine has to change the parameters based on supplied power. Maybe your mind is kind of in the same place...since the power grid too, has a tolerance of supplied voltage and Hz frequency. Apologies, it is an interesting question and I have an inquisitive mind.
I would start keeping notes of the specifics on the neck dimensions and condition of the brass, and the overall case weight.Codes varied but usually around 5-6 more on them
Brass was same lots. Necks unaltered
I do keep track of that infoI would start keeping notes of the specifics on the neck dimensions and condition of the brass, and the overall case weight.
A code result of 5 to 6 is the threshold of a real difference. You might me able to even detect a seating force change if you were careful.
Have you contacted AMP with your issue? Alex is good about answering email and they may want you to send in some brass if it can't be answered off the top of their heads.
If you didn't catch a response from them in short order, something is wrong. They usually respond to me within hours of them waking up on work days.I do keep track of that info
Yes contacted Amp multiple times in email and no response over 4 months