AG composites GEN 2 tikka stock

[Ucsdryder]

I got a chance to run the new AG composites gen 2 tikka stock. I also have a gen 1 and had some feed issue and thread engagement issues on the action screws. The new stock is amazing. Feeding is 100% with my 7saum out of the factory magazine, thread engagement is much better as well. The fit and finish is perfect, feel is great, recoil absorption is stellar. Here are a few pictures of the 2 stocks side by side. I'll do my best to answer any questions. The gen 2 is on top in the pictures. In the first 2 pictures you can see how much of the screw is sticking out once the screw hits the threads vs the gen 1. In the last picture, the top picture shows how much farther the magazine sits up into the action.

 

[Londerko]

Is this the AG Alpine hunter or the Privateer?Who did you order the AG stock through?
Thanks

 

[ShtrRdy]

Do you happen to know what changes were made for a gen 2?

 

[Ucsdryder]

Is this the AG Alpine hunter or the Privateer?Who did you order the AG stock through?
Thanks

Alpine hunter

 

[Londerko]

Who did you order it through? AG composites told me that they would not sell me a tikka stock. And that I had to order it through one of their dealers/distributors like OMR and a few others

 

[Ucsdryder]

Do you happen to know what changes were made for a gen 2?

The main difference is the depth of the stock from the top of the action to the bottom of the bottom metal. It was too deep which is why the action screws had 2.5 turns of engagement. The gen 2 had double.

In the attached picture you can see the difference in "depth".

 

[Ucsdryder]

Who did you order it through? AG composites told me that they would not sell me a tikka stock. And that I had to order it through one of their dealers/distributors like OMR and a few others

I went through OMR and had a terrible experience. I would strongly suggest going a different route.

 

[Londerko]

I went through OMR and had a terrible experience. I would strongly suggest going a different route.

That's what I was afraid of…

 

[Ucsdryder]

That's what I was afraid of…

Call Pam at AG composites and see who she recommends. They've been great to work with.