Absolute Hammer load data

[Hard rock]

Just put the data here. I will print it and post it for you. Look at the spreadsheet on post #1 . Make sure you include all data.
G

Got it thanks

 

[Hard rock]

Got it thanks

6.5 PRC 123gr absolute 26 in Proof prefit switchlug Hornady once fired cci 250 mag primer 2.955 oal Vitihouri N165 62.3 grs 3360 62.5 grs 3394 62.8 grs 3396 63.1 grs3427 63 .3 grs 3441 63 .5 grs 3452 compressed load no ejector marks slight stiff bolt lift on last load of of 63.5 grs primer pockets ok accuraccy exellent through out entire ladder test of of 12 shots starting at 58.3 grs too63.5 grs 6 bulleets touching 10 of the 12 at one in

 

[Hard rock]

6.5 PRC 123gr absolute 26 in Proof prefit switchlug Hornady once fired cci 250 mag primer 2.955 oal Vitihouri N165 62.3 grs 3360 62.5 grs 3394 62.8 grs 3396 63.1 grs3427 63 .3 grs 3441 63 .5 grs 3452 compressed load no ejector marks slight stiff bolt lift on last load of of 63.5 grs primer pockets ok accuraccy exellent through out entire ladder test of of 12 shots starting at 58.3 grs too63.5 grs 6 bulleets touching 10 of the 12 at one in

I think Vitivouri N 560 would get me too 3500 fps or better but dont have any originally started working with N165 because it burns clean and cool from what I read seems too be about the same burn rate of R 23

 

[Hard rock]

I think Vitivouri N 560 would get me too 3500 fps or better but dont have any originally started working with N165 because it burns clean and cool from what I read seems too be about the same burn rate of R 23

Also thats a 150 fps gain over the 124 gr hammer with 58 .3 grs of N165 Thanks for all the hard work and free advice from Tailor Bean and Steve

 

[Hard rock]

Also thats a 150 fps gain over the 124 gr hammer with 58 .3 grs of N165 Thanks for all the hard work and free advice from Tailor Bean and Steve

Read over my post that will be a 1-8 twist

 

[GLTaylor]

@Hard rock, your data is posted

 

[Hard rock]

@Hard rock, your data is posted

Thanks Tailor

 

[Hard rock]

Thanks Tailor

Thanks for posting Tailor the oal was 2.955 not 2.995 crimped on second drive band from nose of bullet

 

[GLTaylor]

Will correct and add crimp.
Taylor

 

[Hard rock]

Will correct and add crimp.
Taylor

Thanks again

 

[GLTaylor]

OK folks...Steve just sent me a text. We have a new Absolute Hammer for the quarter bore! 117 gr for 1-8.5 twist. Have at it Butterbean and others!!!!!
Dang it's getting hard to keep up!
G

 

[Dmagna]

Started using the 87 gr Absolute Hammer in my 6mm arc. Using n540 28-29 grains at 2700 FPS in a 18 inch gas gun.

Probably could using leverevolution and speed it up but I hate ball powders.

 

[GLTaylor]

Need more data if you want me to post the above?

 

[Dmagna]

It's starline brass 28.4 gr of n540 cci450 with the absolute hammer 87 gr