7mm Rem cases stick in RCBS fl die

You're experiencing normal bottle neck case expander ball drag.

That's it! That's the best explanation I could imagine.

If you are having roughness when running the expander ball back out of the neck on the down-stroke, then try some Imperial Sizing Wax and stick the case mouth (the bullet end) down into the wax up to where the neck meets the shoulder. Then twist and pull it out. Then take the excess on the case neck and rub it all over the rest of the case with your index finger.

And this has been my answer to it!

I thank all of you guys.

LRH members always win!
 
One thing about the wax is that it will build up over time, so from time to time, clean your dies out and wipe the expander ball off to keep from building up any excess causing any issues.

Glad to see it helped you out.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top