I found my node with H1000 on a 22in tube, 180 Hybrid & Fed215 with ADG……2840
I was pushing hard, but here's what I have.berger prices are killing me so going to try some loads with the 162 ELDM as the BC is about the same as the 175 elite. Assuming the 162 BC isn't inflated, ballistics should be good, assuming I can push it faster than the 175. Anybody loading these with N560 or RL23? Any type of jump they prefer?
I wasn't pushing hard, but here's what I have.
22" 1-8TW - ADG- fed 210 SAAMI SA
COAL 2.950. All 5-shot data
57.8 H4831SC 2787 SD 8-ES 18 .45
59 RL 23 2875 SD 11 ES 20 .68
54.5 H4350 2827 .44
57.8 IMR 4955 1.5"
62 N565 -62 2820 .68
RL26 61 2851 .53
Was or wasn't pushing hard? Those don't seem like crazy high charges compared to what I have used on my 22" with 175's, however mine is a long throat and actionI was pushing hard, but here's what I have.
22" 1-8TW - ADG- fed 210 SAAMI SA
COAL 2.950. All 5-shot data
57.8 H4831SC 2787 SD 8-ES 18 .45
59 RL 23 2875 SD 11 ES 20 .68
54.5 H4350 2827 .44
57.8 IMR 4955 1.5"
62 N565 -62 2820 .68
RL26 61 2851 .53
Tried to edit it to sayWas or wasn't pushing hard? Those don't seem like crazy high charges compared to what I have used on my 22" with 175's, however mine is a long throat and action
No worries. That gives me a good idea, thank you!Tried to edit it to say
Wasn't.
Sorry
This data is with 162 eldm…..?I was pushing hard, but here's what I have.
22" 1-8TW - ADG- fed 210 SAAMI SA
COAL 2.950. All 5-shot data
57.8 H4831SC 2787 SD 8-ES 18 .45
59 RL 23 2875 SD 11 ES 20 .68
54.5 H4350 2827 .44
57.8 IMR 4955 1.5"
62 N565 -62 2820 .68
RL26 61 2851 .53