Anyone had any luck with these?
Powder used?
I'm running a 26" 8 twist.
Not much experience with mono's.
Thanks!
Powder used?
I'm running a 26" 8 twist.
Not much experience with mono's.
Thanks!
7 prc/150gr badlands BDII’s
- Thread starter Phil Rizzo
- Start date
Help Support Long Range Hunting Forum
I ran some 150 CX, 150 TTSX, and 153 HHTs through my 7 PRC. All with great accuracy. Don't know why the Badlands would be any different. I'll look up load data in a bit.
20" Proof 8 twist Peterson brass Fed 215
150 TTSX 3.11 (book length)
RL 26
66-2823 2829
67-2876 2873
68-2943 2956
68.5-2974 2972
69-3028 slight ejector mark
H4350
58-2758 2778
59-2802 2829
60-2875 2870
60.5-2881 2894 one hole
153 HHT 3.31 roughly .025 off
RL 26
66-3055
67-3075 slight ejector
H4350
61-2995
62-3013
63-3081 ejector a bolt lift
61&62 same hole
150 CX 3.135 OAL
RL26
67-2953
68-3044 3016
68.5 3106 ejector bolt lift
I might try som H1000 it did real well with 175 ELDX.
20" Proof 8 twist Peterson brass Fed 215
150 TTSX 3.11 (book length)
RL 26
66-2823 2829
67-2876 2873
68-2943 2956
68.5-2974 2972
69-3028 slight ejector mark
H4350
58-2758 2778
59-2802 2829
60-2875 2870
60.5-2881 2894 one hole
153 HHT 3.31 roughly .025 off
RL 26
66-3055
67-3075 slight ejector
H4350
61-2995
62-3013
63-3081 ejector a bolt lift
61&62 same hole
150 CX 3.135 OAL
RL26
67-2953
68-3044 3016
68.5 3106 ejector bolt lift
I might try som H1000 it did real well with 175 ELDX.
Last edited:
