Jed Cooper
Well-Known Member
If in the wrong forum I apologize. Should I have any problems shooting and/or extraction with factory 7.62x51 Nato ammo in my 308 BLR, or Ruger bolt 308? Thanks in advance.
7.62 x 51 ammo question?
- Thread starter Jed Cooper
- Start date
Help Support Long Range Hunting Forum
Jerry M
Well-Known Member
No problem with that combination.
Daves762
Well-Known Member
7.62x51 nato ammo runs at much lower pressure than factory 308. So if the barrel is stamped 308, then you will be fine.
cohunt
Well-Known Member
They are very close to the same pressure, one is usually rated in psi- the other in cup.
Daves762
Well-Known Member
Can You Shoot a 7.62 x 51 Ammo in a .308 Rifle? - Hunting heart
All about hunting dogs, deer hunting and hunting as a lifestyle. Here we answer the question: Can You Shoot a 7.62 x 51 Ammo in a .308 Rifle?
huntingheart.com
cohunt
Well-Known Member
Who you gonna believe ? There have been numerous articles written over the years that are wrong-- the 7.62x51 is rated in cup -NOT psi. They don't directly convert either so there is lots of confusion but 50000cup is about 60000psi (but as I said its not a direct conversion)Can You Shoot a 7.62 x 51 Ammo in a .308 Rifle? - Hunting heart
All about hunting dogs, deer hunting and hunting as a lifestyle. Here we answer the question: Can You Shoot a 7.62 x 51 Ammo in a .308 Rifle?
Here is my "internet article proof"
An Official Journal Of The NRA | .308 Win. vs. 7.62 NATO: What's the Difference?
There's not a lot of big differences with .308 vs 7.62 nato, but they are there.
The real way to see would be to compare the saami spec of 308win vs the NATO milspec of 7.62x51 ammo . Instead or reading "internet truth"
Last edited:
Daves762
Well-Known Member
Do you know why the commie left is winning? Because they are united in their agenda/evil.
Do you know why the patriotic right is losing? Because every time one of us speaks, seven of you jump all over us trying to pick apart everything we say, prove us wrong, and criticize.
You know what? YOU ARE RITE!!! You are so effing smart I admire you. Thank you for sharing your infinite knowledge with one of the underlings. Thank you so much.
Do you know why the patriotic right is losing? Because every time one of us speaks, seven of you jump all over us trying to pick apart everything we say, prove us wrong, and criticize.
You know what? YOU ARE RITE!!! You are so effing smart I admire you. Thank you for sharing your infinite knowledge with one of the underlings. Thank you so much.
cohunt
Well-Known Member
No need to get bent out of shape or to spread mis-information to a guy that's asking for answers. We are never to old to learn.
Jed Cooper
Well-Known Member
I shot both today and my BLR defiantly liked the PMC 308 as opposed to the Win 7.62 M80. The 7.62 had bubbled looking primers(slightly domed shape) as if a headspace issue and printed 3" higher at 50 yards than the 308. Extraction was normal with both loads. The 308 PMC primers looked very normal.
Last edited:
glazer1972
Well-Known Member
If the bolt will close it will go.
