7/300 PRC seating die

[RevXP_09]

Hey guys, I'm having a 7/300 PRC built and trying to see what people are doing for a seating die. I'm probably going with a SAC sizing die but their seating die won't work with my co-ax press. Thanks.

 

[Huntnful]

I have several necked down wild cats and just use the standard cartridge size for the seating die. I end up with very little runout and excellent groups. So in your case, whatever 300 PRC seating die that suites your fancy.

 

[RevXP_09]

Ok thanks, runout was my concern, I'll pick up a standard 300prc die and see how it goes.

 

[haisardao]

If you can get a 300 PRC in line die for an arbor press and buy the 7mm bullet seating stem, this has worked for me well.

 

[Huntaddict]

I have had a 7/300 for 5 years.
Reading 300 PRC type S with a 310 bushing

Buying 300 PRC brass. you will likely need 3 bushings. 323. 317. 310.

 

[RevXP_09]

I have looked at SAC die for an arbor press but was trying to avoid buying another press and their $400+ dollar die.

I was looking at custom Redding dies but they're 20 weeks out. The necking down isn't an issues I'll be basically doing what @Huntaddict said for sizing, just trying to find the best option for bullet seating.

 

[haisardao]

You can also buy a 7 mm seating stem for some seating dies, like Hornady and Redding competition line of dies. Getting an K&M arbor press and a LE Wilson seating die will probably be more
Like $220 way cheaper than SAC

 

[Huntaddict]

I have looked at SAC die for an arbor press but was trying to avoid buying another press and their $400+ dollar die.

I was looking at custom Redding dies but they're 20 weeks out. The necking down isn't an issues I'll be basically doing what @Huntaddict said for sizing, just trying to find the best option for bullet seating.

No one has a 300 PRC Die? Anywhere?
That sucks - if I had another one, I would offer it to you

 

[Mickp7]

How does the SAC sizing die work with your press but not the seating die?

I love their seating die, which can be used for multiple cartridges as well... maybe offsetting the high cost?

 

[Huntaddict]

If you can get a 300 PRC in line die for an arbor press and buy the 7mm bullet seating stem, this has worked for me well.

Spot on