W
Wyo37
Guest
Sub 400yds when shooting the STW and Rum. Sub 300yds when shooting the .260's.
No 6mm creedmoor?
Sub 400yds when shooting the STW and Rum. Sub 300yds when shooting the .260's.
I've found the same issue in each of them I've tried it in from 6.5 up through 300Rum.No 6mm creedmoor?
Yes, the 6CM should push them around 3,000-3,200fps if and when Hornady comes out with them. That's just under the velocity I was getting from the 300 RUM and 300-400fps faster than the .260Rem.Does a 6mm creedmoor produce the same velocity as an STW?]
I just thought the discussion was about the 6mm creedmoor. And the the hornady 108eldm and 103eldx.
I am curious did you have to add freebore for the 109? I think it would be the best possible hunting bullet out of the 6 creed and 3k or there about seems to be an ideal MV for the hybrids that I have played with. Congrats on the 7 animals, that's a good year.Killed 7 animals with mine this year and every one of them was perfect performance
109 berger 3080 fps 350-420 yards
It is a sweet little round and unreal accurate
No need to add freebore. The 109 is my go to projectile in my competition rig and that has a .109 freebore vs the .183I am curious did you have to add freebore for the 109? I think it would be the best possible hunting bullet out of the 6 creed and 3k or there about seems to be an ideal MV for the hybrids that I have played with. Congrats on the 7 animals, that's a good year.
Yes, the 6CM should push them around 3,000-3,200fps if and when Hornady comes out with them. That's just under the velocity I was getting from the 300 RUM and 300-400fps faster than the .260Rem.
And again should I expect different performance from a 6mm version of the same bullet? If so, why?
What powder do you run with the 109?No need to add freebore. The 109 is my go to projectile in my competition rig and that has a .109 freebore vs the .183
H4350. I've never actually hit pressure with it but my competition load is 3093 fps with 40.8 grainsWhat powder do you run with the 109?
Well no, you started the argument.You like to argue don't you? OK. Fine.
You've never used the specific cartridge or bullets being discussed, yet you make declarations about them. You're making a correlation based off of other cartridges you've used, yet don't even provide bullet specifics you used.
Answer your own question. Should you expect different performance from a 6mm version of the same bullet (that still hasn't been documented by you)?
I get it. You come here to argue, so much so you don't even believe your lying eyes when shown proof. Continue arguing, with yourself.
Well since you believe that we need not discuss the actual cartridge (6mm creedmoor) and bullets (108eldm or 103eldx)Well no, you started the argument.
I'll ask again, why should I expect different performance from the same bullets in the 6mm vs all the others I've shot them in?
If so, based on what exactly?
Nice man, thanks for the info!H4350. I've never actually hit pressure with it but my competition load is 3093 fps with 40.8 grains
Well since you believe that we need not discuss the actual cartridge (6mm creedmoor) and bullets (108eldm or 103eldx)
Anyone using Hornady ELD Match for LR hunting?
I don't want to debate if we should or not. Just want to know if anyone has any first-hand experience with them on animals?www.rokslide.com
Here's 14 pages worth of dead animals from all sorts of eldm's, since all are the same.
You do nothing but argue about anything and everything, I'm sure actual documentation of the eldm's performance on game will not suffice.