6.5 saum freebore

schrock27

Well-Known Member
Joined
Dec 5, 2013
Messages
189
Location
SW PA
I am getting ready to have a 6.5 saum put together and I am not sure which freebore to use(.081 or .120). I am wanting to run 140 hybrids but may want to experiment with the heavier eld bullets. The rifle will be a bdl setup with a Wyatt's cfe-5 box mag that has a 2.995" inside length.

Thanks
Anthony
 
I have an r700 SA and use it with CDI bottom metal and magazines, max COAL of about 2.925. My chamber is cut with the .081 freebore reamer.

With the 150 SMK I'm right at 2.900 and .020 jump.
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top