6.5 PRC Detachable Mag - LONG Action solved (for me)

[jareese]

I just checked mine again and it feeds flawlessly. Are you positive you got the same one I listed above?

".308 WIN. LONG ACTION SSSF MAGAZINE" https://accurate-mag.com/shop/magazines/longactionaics/308-win-long-action-sssf-magazine/
I hope linking to this is OK.

 

[jareese]

Also mine is engraved on the side Accurate-Mag on one side, USA with a flag on the other and their logo on the bottom.
I would not be surprised if there are knock-offs out there. They won't be marked. I'd expect at LEAST to see the logo on the bottom.

 

[reid matschek]

No sir. Right out of the box

 

[reid matschek]

I just checked mine again and it feeds flawlessly. Are you positive you got the same one I listed above?

".308 WIN. LONG ACTION SSSF MAGAZINE" https://accurate-mag.com/shop/magazines/longactionaics/308-win-long-action-sssf-magazine/
I hope linking to this is OK.

Yessir. I just copied and pasted from your previous post

 

[Kmccord]

I would call the place you purchased it and tell them the problems you are having, I am sure they can advise on what to do or send you a replacement.

 

[jareese]

I would call the place you purchased it and tell them the problems you are having, I am sure they can advise on what to do or send you a replacement.

Was just gonna suggest the same

 

[bigbulls]

Has this worked for anybody else? Wanting to get the 3 rounder to use in a LA Hunt 26 chassis 6.5 PRC

 

[reid matschek]

The long action .308 did not work for me. I had to get the 300 WM magazine for my long action 6.5 PRC. The 308 mag is too skinny and pinches the round to where it won't feed upwards into the action

 

[bigbulls]

The long action .308 did not work for me. I had to get the 300 WM magazine for my long action 6.5 PRC. The 308 mag is too skinny and pinches the round to where it won't feed upwards into the action

Did you have to do any feed lip adjustment? Or did it work as is? Has anybody here tried the MDT 7 PRC 3 round mag? Looking at the saami spec's on the brass it just looks like it should work. 7PRC MDT CIP LA Polymer Magazine - 3 RND

 

[reid matschek]

No lip adjustments yet. Maybe in the future