Stiller 1.6" .408 Tac repeater, 40 moa rail
Jewel bottom safety trigger
Mcmillian A5 Supermag
Baer bottom metal and mag
30" Bartlein heavy mag contour (my own) 1-10" twist, 5 port slab muscle brake, 300 rounds
36" K&P barrel, wrought iron fluted, 1-8" twist, 5 port muscle brake, less than 100 rounds
Weighs in the 16 pound range with 30" barrel and 23 pound range with 36".
Whidden dies: FL sizer, bullet seater, hydro forming
At least 50 Peterson brass.
Accutac LR10 bipod
The switch barrel design is similar to WTO's (and yes I spoke to Clayton about this) and uses an action screw and the same 65 inch pound torque wrench (included) I use on the 2 action screws
I can add NightForce NXS 5.5-22x50 moa/moa HS ZS (pictured) and rings for another $1200. A Swarovski LG or Sig KILO2400ABS and/or hard case in picture for an extra fee. Once I got the rifle built how I wanted (it's pretty much there now) I was gonna have Joel Russo do his new extra special coating on the barrels. Got a price from him and can add that in if wanted.
The 30" barrel shoots amazing out to some far ranges with my hunting load of 155 grains of RL50 behind a 375 Chinchaga (.8 G1 BC) bullet @ 3150 fps. The 36" shot great with that same load (over 3200 fps) and the 350 CE Lazers, but I really only used that barrel to test some bullets for Steve @ Hammer Bullets. I have been holding out for the 390 A-tips...
I wanted this rifle (originally built by LRI) for ELR hunting and added the faster twist 36" barrel for ELR comps. However our operation tempo at work leaves me with little of what some call a life. I have more money invested than I care to add up, and it is just sitting there. So I'm selling this and may use some of the money to finish my 33XC build (light'ish hunting rifle), or save it and build something when I retire from the military in 2 years.
Rifle w/both barrels, dies, brass, bipod: $5000
Add the scope & rings: $6200
We can talk about the other fixings.
PM if interested.
Jewel bottom safety trigger
Mcmillian A5 Supermag
Baer bottom metal and mag
30" Bartlein heavy mag contour (my own) 1-10" twist, 5 port slab muscle brake, 300 rounds
36" K&P barrel, wrought iron fluted, 1-8" twist, 5 port muscle brake, less than 100 rounds
Weighs in the 16 pound range with 30" barrel and 23 pound range with 36".
Whidden dies: FL sizer, bullet seater, hydro forming
At least 50 Peterson brass.
Accutac LR10 bipod
The switch barrel design is similar to WTO's (and yes I spoke to Clayton about this) and uses an action screw and the same 65 inch pound torque wrench (included) I use on the 2 action screws
I can add NightForce NXS 5.5-22x50 moa/moa HS ZS (pictured) and rings for another $1200. A Swarovski LG or Sig KILO2400ABS and/or hard case in picture for an extra fee. Once I got the rifle built how I wanted (it's pretty much there now) I was gonna have Joel Russo do his new extra special coating on the barrels. Got a price from him and can add that in if wanted.
The 30" barrel shoots amazing out to some far ranges with my hunting load of 155 grains of RL50 behind a 375 Chinchaga (.8 G1 BC) bullet @ 3150 fps. The 36" shot great with that same load (over 3200 fps) and the 350 CE Lazers, but I really only used that barrel to test some bullets for Steve @ Hammer Bullets. I have been holding out for the 390 A-tips...
I wanted this rifle (originally built by LRI) for ELR hunting and added the faster twist 36" barrel for ELR comps. However our operation tempo at work leaves me with little of what some call a life. I have more money invested than I care to add up, and it is just sitting there. So I'm selling this and may use some of the money to finish my 33XC build (light'ish hunting rifle), or save it and build something when I retire from the military in 2 years.
Rifle w/both barrels, dies, brass, bipod: $5000
Add the scope & rings: $6200
We can talk about the other fixings.
PM if interested.
