300 Win Mag Small Base

[baconeater20]

Looking to borrow a small base 300 Win Mag die. I have 75 pieces of Norma 300 Win Mag brass that was shot out of a BAR and after I run them through my FL die they still dont fit. So wanting to try a SB set. I will pay for the shipping both ways.

Matt

 

[rsmithsr]

to the best of my knowledge, no one makes a sb (small base) die for a belted mag because regular dies do not get to the BASE. there is a collet die that does the job by a guy in FLA.
maybe someone will pop in with his name.

 

[baconeater20]

They sell small base dies for the 300 Win.

 

[shooter7]

Larry Willis collet die might help. Sizes just above the belt and nothing else.

 

[baconeater20]

I saw them but man they are high. I only need them for 75 pieces. Lol

 

[shooter7]

I saw them but man they are high. I only need them for 75 pieces. Lol

If your chamber is loose you might need it more than once.

 

[baconeater20]

It's just the brass from from the BAR I need to fit in my 700

 

[shooter7]

It's just the brass from from the BAR I need to fit in my 700

It's cheaper and less time consuming to just start with virgin brass in the 700. Just use the BAR brass in that rifle and have a separate lot for the 700.

 

[baconeater20]

Well thanks for the info but I will try my direction.

 

[rsmithsr]

so spend twice the money to learn what has been suggested.
dies do NOT size at the belt. larry willis collet die does.
just how much does the brass cost. I have seen 300 win mg brass go over 15 reloads with larry's die

 

[baconeater20]

Got a set of RCBS small base dies. Problem is fixed. Thanks