MagnumManiac
Well-Known Member
I've been using blanks that finish at 29.5" or 30" on my last 6 barrels, they are 1.250" at the chamber and finish at .950" at the muzzle.
No fluting, profiled before chambering and the chambers are rough reamed with a straight tapered reamer before the chamber reamers are used, rougher and finisher. I want my reamers cutting minimum material so they don't dull too quickly.
All this helps with less stress in your barrel.
Cheers.
No fluting, profiled before chambering and the chambers are rough reamed with a straight tapered reamer before the chamber reamers are used, rougher and finisher. I want my reamers cutting minimum material so they don't dull too quickly.
All this helps with less stress in your barrel.
Cheers.
